----- Tom Rini <tr...@konsulko.com> a écrit : > On Mon, Nov 19, 2018 at 05:56:37PM +0100, Guillaume GARDET wrote: > > > > ----- Tom Rini <tr...@konsulko.com> a écrit : > > > On Mon, Nov 19, 2018 at 05:45:03PM +0100, Guillaume GARDET wrote: > > > > > > > This patch allows SPL to load a bigger BL2 (u-boot.bin). > > > > This is needed for and has been tested on Arndale board, as u-boot.bin > > > > is > > > > now bigger than 512K with GCC8. > > > > > > > > Signed-off-by: Guillaume GARDET <guillaume.gar...@free.fr> > > > > > > > > Cc: Minkyu Kang <mk7.k...@samsung.com> > > > > Cc: Tom Rini <tr...@konsulko.com> > > > > --- > > > > include/configs/exynos5-common.h | 2 +- > > > > 1 file changed, 1 insertion(+), 1 deletion(-) > > > > > > Are these platforms using thumb2 to build? Were it not for some early > > > Cortex-A platforms with thumb2 errata I'd be strongly inclined to do a > > > global switch to making that option default. > > > > No, they are not using thumb2: > > # CONFIG_SYS_THUMB_BUILD is not set > > # CONFIG_SPL_SYS_THUMB_BUILD is not set > > I would suggest switching that on instead then. I'm always wary of > changing stuff on the flash layout.
I tested thumb2 for SPL and u-boot.bin on arndale and it does boot properly. u-boot.bin is 397KB with thumb2, which is OK. Should I make the switch for Arndale board only, or on a bigger range? Guillaume > > -- > Tom _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot