From: Jerome Brunet <[email protected]> The nanopi-k2 and the odroid-c2 are similar enough to be supported by the same u-boot board. This change use odroid-c2 u-boot board for the nanopi-k2 as well. Dedicated defconfig are kept to customize the names and device tree.
Signed-off-by: Jerome Brunet <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> --- arch/arm/mach-meson/Kconfig | 11 +--- board/amlogic/nanopi-k2/Kconfig | 12 ---- board/amlogic/nanopi-k2/MAINTAINERS | 6 -- board/amlogic/nanopi-k2/Makefile | 7 --- board/amlogic/nanopi-k2/nanopi-k2.c | 55 ------------------- board/amlogic/odroid-c2/MAINTAINERS | 1 + .../README => odroid-c2/README.nanopi-k2} | 0 .../odroid-c2/{README => README.odroid-c2} | 0 configs/nanopi-k2_defconfig | 2 +- 9 files changed, 3 insertions(+), 91 deletions(-) delete mode 100644 board/amlogic/nanopi-k2/Kconfig delete mode 100644 board/amlogic/nanopi-k2/MAINTAINERS delete mode 100644 board/amlogic/nanopi-k2/Makefile delete mode 100644 board/amlogic/nanopi-k2/nanopi-k2.c rename board/amlogic/{nanopi-k2/README => odroid-c2/README.nanopi-k2} (100%) rename board/amlogic/odroid-c2/{README => README.odroid-c2} (100%) diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig index 98303dbda1..d86b1bed78 100644 --- a/arch/arm/mach-meson/Kconfig +++ b/arch/arm/mach-meson/Kconfig @@ -31,14 +31,7 @@ config TARGET_ODROID_C2 ODROID-C2 is a single board computer based on Meson GXBaby with 2 GiB of RAM, Gigabit Ethernet, HDMI, 4 USB, micro-SD slot, eMMC, IR receiver and a 40-pin GPIO header. - -config TARGET_NANOPI_K2 - bool "NANOPI_K2" - select MESON_GXBB - help - NANOPI_K2 is a single board computer based on Meson GXBaby - with 2 GiB of RAM, Gigabit Ethernet,AP6212 Wifi, HDMI, 4 USB, - micro-SD slot, eMMC, IR receiver and a 40-pin GPIO header. + You should also select this TARGET if you have an nanopi-k2 config TARGET_P212 bool "P212" @@ -69,8 +62,6 @@ config SYS_MALLOC_F_LEN source "board/amlogic/odroid-c2/Kconfig" -source "board/amlogic/nanopi-k2/Kconfig" - source "board/amlogic/p212/Kconfig" source "board/amlogic/q200/Kconfig" diff --git a/board/amlogic/nanopi-k2/Kconfig b/board/amlogic/nanopi-k2/Kconfig deleted file mode 100644 index 374bda200c..0000000000 --- a/board/amlogic/nanopi-k2/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_NANOPI_K2 - -config SYS_BOARD - default "nanopi-k2" - -config SYS_VENDOR - default "amlogic" - -config SYS_CONFIG_NAME - default "nanopi-k2" - -endif diff --git a/board/amlogic/nanopi-k2/MAINTAINERS b/board/amlogic/nanopi-k2/MAINTAINERS deleted file mode 100644 index 0452bd1fa1..0000000000 --- a/board/amlogic/nanopi-k2/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -NANOPI-K2 -M: Neil Armstrong <[email protected]> -S: Maintained -F: board/amlogic/nanopi-k2/ -F: include/configs/nanopi-k2.h -F: configs/nanopi-k2_defconfig diff --git a/board/amlogic/nanopi-k2/Makefile b/board/amlogic/nanopi-k2/Makefile deleted file mode 100644 index 7d9b666e76..0000000000 --- a/board/amlogic/nanopi-k2/Makefile +++ /dev/null @@ -1,7 +0,0 @@ -# -# (C) Copyright 2018 Thomas McKahan -# -# SPDX-License-Identifier: GPL-2.0+ -# - -obj-y := nanopi-k2.o diff --git a/board/amlogic/nanopi-k2/nanopi-k2.c b/board/amlogic/nanopi-k2/nanopi-k2.c deleted file mode 100644 index ae29dd6fa4..0000000000 --- a/board/amlogic/nanopi-k2/nanopi-k2.c +++ /dev/null @@ -1,55 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * (C) Copyright 2018 Thomas McKahan - */ - -#include <common.h> -#include <dm.h> -#include <environment.h> -#include <asm/io.h> -#include <asm/arch/gx.h> -#include <asm/arch/sm.h> -#include <asm/arch/eth.h> -#include <asm/arch/mem.h> - -#define EFUSE_SN_OFFSET 20 -#define EFUSE_SN_SIZE 16 -#define EFUSE_MAC_OFFSET 52 -#define EFUSE_MAC_SIZE 6 - -int board_init(void) -{ - return 0; -} - -int misc_init_r(void) -{ - u8 mac_addr[EFUSE_MAC_SIZE]; - char serial[EFUSE_SN_SIZE]; - ssize_t len; - - meson_gx_eth_init(PHY_INTERFACE_MODE_RGMII, 0); - - if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { - len = meson_sm_read_efuse(EFUSE_MAC_OFFSET, - mac_addr, EFUSE_MAC_SIZE); - if (len == EFUSE_MAC_SIZE && is_valid_ethaddr(mac_addr)) - eth_env_set_enetaddr("ethaddr", mac_addr); - } - - if (!env_get("serial#")) { - len = meson_sm_read_efuse(EFUSE_SN_OFFSET, serial, - EFUSE_SN_SIZE); - if (len == EFUSE_SN_SIZE) - env_set("serial#", serial); - } - - return 0; -} - -int ft_board_setup(void *blob, bd_t *bd) -{ - meson_gx_init_reserved_memory(blob); - - return 0; -} diff --git a/board/amlogic/odroid-c2/MAINTAINERS b/board/amlogic/odroid-c2/MAINTAINERS index 699850fd0c..fd74d53bfe 100644 --- a/board/amlogic/odroid-c2/MAINTAINERS +++ b/board/amlogic/odroid-c2/MAINTAINERS @@ -1,5 +1,6 @@ ODROID-C2 M: Beniamino Galvani <[email protected]> +M: Neil Armstrong <[email protected]> S: Maintained F: board/amlogic/odroid-c2/ F: include/configs/odroid-c2.h diff --git a/board/amlogic/nanopi-k2/README b/board/amlogic/odroid-c2/README.nanopi-k2 similarity index 100% rename from board/amlogic/nanopi-k2/README rename to board/amlogic/odroid-c2/README.nanopi-k2 diff --git a/board/amlogic/odroid-c2/README b/board/amlogic/odroid-c2/README.odroid-c2 similarity index 100% rename from board/amlogic/odroid-c2/README rename to board/amlogic/odroid-c2/README.odroid-c2 diff --git a/configs/nanopi-k2_defconfig b/configs/nanopi-k2_defconfig index 5c8c747bf3..01196d6655 100644 --- a/configs/nanopi-k2_defconfig +++ b/configs/nanopi-k2_defconfig @@ -2,7 +2,7 @@ CONFIG_ARM=y CONFIG_ARCH_MESON=y CONFIG_SYS_TEXT_BASE=0x01000000 CONFIG_MESON_GXBB=y -CONFIG_TARGET_NANOPI_K2=y +CONFIG_TARGET_ODROID_C2=y CONFIG_DEBUG_UART_BASE=0xc81004c0 CONFIG_DEBUG_UART_CLOCK=24000000 CONFIG_IDENT_STRING=" nanopi-k2" -- 2.19.1 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
