On Mon, Nov 26, 2018 at 06:02:28PM -0700, Simon Glass wrote: > Hi Andy, > > On Tue, 20 Nov 2018 at 14:52, Andy Shevchenko > <andriy.shevche...@linux.intel.com> wrote: > > > > In some cases it would be good to know the settings, such as parity, > > of current serial console. One example might be an ACPI SPCR table > > to generate using these parameters. > > > > Signed-off-by: Andy Shevchenko <andriy.shevche...@linux.intel.com> > > --- > > drivers/serial/sandbox.c | 13 +++++++++++++ > > drivers/serial/serial-uclass.c | 16 ++++++++++++++++ > > include/common.h | 1 + > > include/serial.h | 26 +++++++++++++++++++++++--- > > test/dm/serial.c | 7 +++++++ > > 5 files changed, 60 insertions(+), 3 deletions(-) > > > > My only concern is that serial_get_config() should have a device parameter.
It's obviously out of scope of this series. The rest of similar functions are operate on top of current console device and do not have such parameter, while being DM-based functions. I would gladly rebase my series on top any work which is done regard above request. For now, I don't see such possibility. -- With Best Regards, Andy Shevchenko _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
