If DM_USB_GADGET is used, the usb ethernet gadget driver must be bound to a
controller before the image can be downloaded over the network.
In u-boot this can be done with the bind command. In SPL it must be done
programmatically.
Signed-off-by: Jean-Jacques Hiblot <jjhib...@ti.com>
Reviewed-by: Tom Rini <tr...@konsulko.com>
---
Changes in v2:
- use CONFIG_IS_ENABLED(DM_USB_GADGET) instead of CONFIG_DM_USB_GADGET
common/spl/spl_net.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/common/spl/spl_net.c b/common/spl/spl_net.c
index b6967ff..c91ad2b 100644
--- a/common/spl/spl_net.c
+++ b/common/spl/spl_net.c
@@ -85,7 +85,9 @@ int spl_net_load_image_usb(struct spl_image_info *spl_image,
struct spl_boot_device *bootdev)
{
bootdev->boot_device_name = "usb_ether";
-
+#if CONFIG_IS_ENABLED(DM_USB_GADGET)
+ usb_ether_init();
+#endif
return spl_net_load_image(spl_image, bootdev);
}
SPL_LOAD_IMAGE_METHOD("USB eth", 0, BOOT_DEVICE_USBETH,
spl_net_load_image_usb);
--
2.7.4
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
