On Tue, Dec 4, 2018 at 11:25 AM Otavio Salvador <[email protected]> wrote: > > The motivation for this is to allow distributions to distribute all > possible tools in a generic way, avoiding the need of specific tools > building for each machine. > > Especially on OpenEmbedded / Yocto Project ecosystem, it is very > common each BSP to end providing their specific tools when they need > to generate images for some SoC (e.g MX23 / MX28 in meta-freescale > case). > > Using this, we can package the tools doing: > > $: make tools-all_defconfig > $: make tools-all > > Signed-off-by: Otavio Salvador <[email protected]> Tested-by: Peter Robinson <[email protected]>
The tools build for me across a number of architectures, the tools list is the same as 2018.09. Thanks > --- > > configs/tools-all_defconfig | 3 +++ > tools/Makefile | 2 +- > 2 files changed, 4 insertions(+), 1 deletion(-) > create mode 100644 configs/tools-all_defconfig > > diff --git a/configs/tools-all_defconfig b/configs/tools-all_defconfig > new file mode 100644 > index 0000000000..be69bdf43a > --- /dev/null > +++ b/configs/tools-all_defconfig > @@ -0,0 +1,3 @@ > +CONFIG_SYS_TEXT_BASE=0 > +CONFIG_FIT=y > +CONFIG_FIT_SIGNATURE=y > diff --git a/tools/Makefile b/tools/Makefile > index c93d17a42f..29ff6ed221 100644 > --- a/tools/Makefile > +++ b/tools/Makefile > @@ -125,7 +125,7 @@ fit_info-objs := $(dumpimage-mkimage-objs) fit_info.o > fit_check_sign-objs := $(dumpimage-mkimage-objs) fit_check_sign.o > file2include-objs := file2include.o > > -ifneq ($(CONFIG_MX23)$(CONFIG_MX28),) > +ifneq ($(CONFIG_MX23)$(CONFIG_MX28)$(CONFIG_FIT_SIGNATURE),) > # Add CONFIG_MXS into host CFLAGS, so we can check whether or not register > # the mxsimage support within tools/mxsimage.c . > HOSTCFLAGS_mxsimage.o += -DCONFIG_MXS > -- > 2.19.2 > _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
