On Wed, Dec 05, 2018 at 02:53:42PM +0100, Felix Brack wrote: > This patch synchronizes the am33xx SoC specific files with those from > Linux 4.20.0. Hence all board maintainers of am33xx based boards are > on the cc list. > The main purpose of this patch is to prevent further diverging of the > dts files from U-Boot and those from Linux. It aims to set the stage > for the synchronization of board specific dts files. Example: I'm the > maintainer of the PDU001 board: once this patch is applied successfully > I will make changes to the board specific dts file in Linux only and > then post a patch with a copy of this exact dts file to U-Boot. This > will make U-Boot and Linux remain in sync. > The stumbling block of https://patchwork.ozlabs.org/patch/943627 was > removed by the patch https://patchwork.ozlabs.org/patch/962428 from > Lokesh Vutla (many thanks!). This omap-serial driver allows using the > Linux am33xx.dtsi file in U-Boot. > Other changes to dts and dtsi files made by this patch are mainly to > prevent _new_ warnings during the build process. Especially the warning > at pinmux@800 stating 'unnecessary #address-cells/#size-cells without > "ranges" or child "reg"' was not removed. This warning is a good example > showing the benefit of the synchronization: if it needs to be fixed it > will be fixed in Linux and ported back to U-Boot. > Buildman reports all 46 am33xx SoC based boards to build fine, with > warnings of course. Nevertheless this patch should be tested thoroughly > on as many boards as possible to prevent any collateral damage. > > Signed-off-by: Felix Brack <[email protected]>
Reviewed-by: Tom Rini <[email protected]> -- Tom
signature.asc
Description: PGP signature
_______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
