On 12/09/2018 09:50 PM, Simon Goldschmidt wrote: > Am 17.11.2018 um 17:02 schrieb Joe Hershberger: >> On Sat, Nov 17, 2018 at 3:25 AM Simon Goldschmidt >> <simon.k.r.goldschm...@gmail.com> wrote: >>> >>> The designware driver has a bug in setting the tx length into the dma >>> descriptor: it always or's the length into the descriptor without >>> zeroing out the length mask before. >>> >>> This results in occasional packets being transmitted with a length >>> greater than they should be (trailer). Due to the nature of Ethernet >>> allowing such a trailer, most packets seem to be parsed fine by remote >>> hosts, which is probably why this hasn't been noticed. >>> >>> Fix this by correctly clearing the size mask before setting the new >>> length. >>> >>> Tested on socfpga gen5. >>> >>> Signed-off-by: Simon Goldschmidt <simon.k.r.goldschm...@gmail.com> >> >> Acked-by: Joe Hershberger <joe.hershber...@ni.com> >> > > Marek, this and 2/2 is a assigned to you in patchwork, will you push > them or is it Joe's code as u-boot-net maintainer?
This is net , so Joe should pick it . -- Best regards, Marek Vasut _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot