Hello Christoph, Am 04.12.2018 um 11:27 schrieb Christoph Muellner:
In case SYS_I2C or DM_I2C are defined, then the "i2c " prefix of the "i2c crc32" command is missing. This patch addresses this, so that users can't get confused by the "crc32" command.Without the patch we get => i2c help i2c - I2C sub-system Usage: i2c bus [muxtype:muxaddr:muxchannel] - show I2C bus info crc32 chip address[.0, .1, .2] count - compute CRC32 checksum i2c dev [dev] - show or set current I2C bus [...] With the patch we get => i2c help i2c - I2C sub-system Usage: i2c bus [muxtype:muxaddr:muxchannel] - show I2C bus info i2c crc32 chip address[.0, .1, .2] count - compute CRC32 checksum i2c dev [dev] - show or set current I2C bus ... Signed-off-by: Christoph Muellner <[email protected]> --- cmd/i2c.c | 1 + 1 file changed, 1 insertion(+)
Good catch, thanks! Reviewed-by: Heiko Schocher <[email protected]> bye, Heiko -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: +49-8142-66989-52 Fax: +49-8142-66989-80 Email: [email protected] _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
