On Tue, 2018-12-18 at 01:05 +0100, Daniel Schwierzeck wrote: > > Am 16.12.18 um 23:25 schrieb Ezequiel Garcia: > > A new round, addressing feedback from Daniel. > > > > Daniel: do you think this is acceptable as a first submission? > > > > v3: > > * Cleanup SoC reset logic. > > * Move gpio driver to SoC specific code, to be used by SPL. > > A proper dm gpio driver will be added later. > > * Cleaned up SPDX. > > * Added myself as JZ4780 maintainer. > > * Added TODO file. > > > > v2: > > > > * Replaced infinite while loop with wait_for_bit. > > * Added a MAINTAINERS file. If anyone wants to co-maintain this, > > please let me know. > > > > This is based on master and has been tested by SD-card booting > > both U-Boot and Linux. Booting Linux via TFTP was also tested. > > > > I've pushed a branch to > > https://github.com/ezequielgarcia/u-boot/tree/ci20-v3 > > and started travis. > > > > Note that Paul's contributions are recorded using his imgtec.com > > mail although it's no longer valid, and that we will rely on mailmap > > to map it to mips.com. > > > > It would be terrific to fit this on the next release. > > > > Thanks! > > > > Paul Burton (5): > > misc: Add JZ47xx efuse driver > > mmc: Add JZ47xx SD/MMC controller driver > > mips: Add SPL header > > mips: jz47xx: Add JZ4780 SoC support > > mips: jz47xx: Add Creator CI20 platform > > applied to u-boot-mips, thanks. > > I fixed some additional SPDX license identifiers because not all files > got updated ;) I also fixed some minor checkpatch.pl issues. > > I renamed the defconfig to ci20_mmc to clearly indicate the MMC boot > mode in case someone wants to add boot from NAND or USB later. The > latter could be useful for developing. I hope you don't mind ;) >
Great. I had the intention to rename the defconfig, but then I forgot about it, so thanks. > I also moved CONFIG_MISC_INIT_R from ci20.h to defconfig as this option > has been converted to Kconfig some time ago. Finally I enabled cmd_dm to > quickly test current DM integration. > Cool. > The updated series still booted on my rev1 board. > > Maybe one of the next improvements should be to enable > CONFIG_DISTRO_DEFAULTS and CONFIG_MIPS_BOOT_FDT. > OK. Let me take a look at that. Thanks, Ezequiel _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
