On Tue, Dec 18, 2018 at 09:17:27PM +0100, Michael Nazzareno Trimarchi wrote: > Hi Karl > > On Tue, Dec 18, 2018 at 7:12 PM Karl Palsson <[email protected]> wrote: > > > > > > Jagan Teki <[email protected]> wrote: > > > It's 4 days before, "U-Boot] sunxi: regression in dram init for > > > h3 board" > > > > > > 7 days is not 4-days :) > > > > True, it was last week, not a week ago. > > > > > I would expect some debugging on this during these days and > > > find the real root cause. > > > > Just so there's no unmet expectations here, I'm not doing any > > _debugging_ of this. (Nor do I have any planned) Given that this > > is a regression in working devices, I would _presume_ (quite > > likely wrongly) that the honus of debugging this would be on the > > people who suggested this patch, not people affected by it. I'm > > happy to test things, but I have zero experience with dram init, > > (only marginally greater than zero experience with uboot overall) > > and no sane methods for debugging this further, nor enough > > devices to give any test confidence that any debugging I could do > > would be useful. > > > > Do you have error after relocation or before relocation? Does it go > outside and print DRAM size?
When I tested, I replaced hang there with reboot and got following outputs after multiple FEL uboot uploads commands: [snip] U-Boot SPL 2019.01-rc1-00341-gb2f6eec007-dirty (Dec 18 2018 - 09:31:01 +0200) DRAM: 0 MiB resetting ... U-Boot SPL 2019.01-rc1-00341-gb2f6eec007-dirty (Dec 18 2018 - 09:31:01 +0200) DRAM: 2048 MiB Trying to boot from FEL U-Boot SPL 2019.01-rc1-00341-gb2f6eec007-dirty (Dec 18 2018 - 09:31:01 +0200) DRAM: 1024 MiB Trying to boot from FEL [/snip] > > Michael > > > Sincerely, > > Karl P_______________________________________________ > > U-Boot mailing list > > [email protected] > > https://lists.denx.de/listinfo/u-boot > > > > -- > | Michael Nazzareno Trimarchi Amarula Solutions BV | > | COO - Founder Cruquiuskade 47 | > | +31(0)851119172 Amsterdam 1018 AM NL | > | [`as] http://www.amarulasolutions.com | > > -- > You received this message because you are subscribed to the Google Groups > "linux-sunxi" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to [email protected]. > For more options, visit https://groups.google.com/d/optout. _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
