From: Patrick Bruenn <p.bru...@beckhoff.com>
These nodes are required by CX9020 when build with CONFIG_DM_MMC=y
They are copied from Linux 4.20
Signed-off-by: Patrick Bruenn <p.bru...@beckhoff.com>
---
arch/arm/dts/imx53.dtsi | 34 ++++++++++++++++++++++++++++++++++
1 file changed, 34 insertions(+)
diff --git a/arch/arm/dts/imx53.dtsi b/arch/arm/dts/imx53.dtsi
index 64591f9d476..e13009c8708 100644
--- a/arch/arm/dts/imx53.dtsi
+++ b/arch/arm/dts/imx53.dtsi
@@ -31,6 +31,8 @@
i2c0 = &i2c1;
i2c1 = &i2c2;
i2c2 = &i2c3;
+ mmc0 = &esdhc1;
+ mmc1 = &esdhc2;
};
tzic: tz-interrupt-controller@fffc000 {
@@ -54,6 +56,38 @@
reg = <0x50000000 0x10000000>;
ranges;
+ spba@50000000 {
+ compatible = "fsl,spba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x50000000 0x40000>;
+ ranges;
+
+ esdhc1: esdhc@50004000 {
+ compatible = "fsl,imx53-esdhc";
+ reg = <0x50004000 0x4000>;
+ interrupts = <1>;
+ clocks = <&clks
IMX5_CLK_ESDHC1_IPG_GATE>,
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks
IMX5_CLK_ESDHC1_PER_GATE>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ esdhc2: esdhc@50008000 {
+ compatible = "fsl,imx53-esdhc";
+ reg = <0x50008000 0x4000>;
+ interrupts = <2>;
+ clocks = <&clks
IMX5_CLK_ESDHC2_IPG_GATE>,
+ <&clks IMX5_CLK_DUMMY>,
+ <&clks
IMX5_CLK_ESDHC2_PER_GATE>;
+ clock-names = "ipg", "ahb", "per";
+ bus-width = <4>;
+ status = "disabled";
+ };
+ };
+
iomuxc: iomuxc@53fa8000 {
compatible = "fsl,imx53-iomuxc";
reg = <0x53fa8000 0x4000>;
--
2.11.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
