On Thu, Jan 3, 2019 at 7:20 AM Mark Kettenis <mark.kette...@xs4all.nl> wrote: > > > From: Simon Glass <s...@chromium.org> > > Date: Wed, 2 Jan 2019 18:15:31 -0700 > > > > Hi Kever, > > > > I have a firefly-rk3399 and would like to boot it into U-Boot (as a start) > > from an uSD card. > > > > Are there instructions somewhere on how to do this? I gather that I need > > OP-TEE but not how to build it or how to put the image together. I would > > like to have instructions in README.rockchip if possible. > > > > I'm planning to add U-Boot support for bob and maybe kevin (both > > Chromebooks) but am not sure where to start. I thought the firefly might be > > best since it is pretty common. > > Hi Simon, > > The instructions in board/u-boot/rockchip/evb_rk3399/README apply to > the firefly-rk3399 as well. I've successfully built working firmware > for my board using the TF-A (ATF) 2.0 release and U-Boot SPL in the > past that way.
What is TF-A here, I'm trying to build master, but it's failed to build $ make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399 bl31 make -C plat/rockchip/rk3399/drivers/m0 BUILD=/root/arm-trusted-firmware/build/rk3399/release/m0 make[1]: Entering directory '/root/arm-trusted-firmware/plat/rockchip/rk3399/drivers/m0' CC src/dram.c arm-none-eabi-gcc -g -mcpu=cortex-m0 -mthumb -Wall -O3 -nostdlib -mfloat-abi=soft -ffunction-sections -fdata-sections -fomit-frame-pointer -fno-common -Iinclude/ -I../../include/shared/ -MMD -MT /root/arm-trusted-firmware/build/rk3399/release/m0/dram.o -c src/dram.c -o /root/arm-trusted-firmware/build/rk3399/release/m0/dram.o make[1]: arm-none-eabi-gcc: Command not found _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot