Am 06.01.19 um 18:23 schrieb Horatiu Vultur: > Add configuration that is used by Jaguar2 SOC family. > > Signed-off-by: Horatiu Vultur <[email protected]> > --- > arch/mips/dts/Makefile | 1 + > configs/mscc_jr2_defconfig | 59 > ++++++++++++++++++++++++++++++++++++++++++++++ > 2 files changed, 60 insertions(+) > create mode 100644 configs/mscc_jr2_defconfig >
this patch should be squashed with patch 7/7. Otherwise one can configure this board but not build it. This is bad for bisectability or building each commit of a series with buildman. > diff --git a/arch/mips/dts/Makefile b/arch/mips/dts/Makefile > index b61afe6..1484db9 100644 > --- a/arch/mips/dts/Makefile > +++ b/arch/mips/dts/Makefile > @@ -19,6 +19,7 @@ dtb-$(CONFIG_BOARD_TPLINK_WDR4300) += tplink_wdr4300.dtb > dtb-$(CONFIG_TARGET_JZ4780_CI20) += ci20.dtb > dtb-$(CONFIG_SOC_LUTON) += luton_pcb090.dtb luton_pcb091.dtb > dtb-$(CONFIG_SOC_OCELOT) += ocelot_pcb120.dtb ocelot_pcb123.dtb > +dtb-$(CONFIG_SOC_JR2) += jr2_pcb110.dtb jr2_pcb111.dtb serval2_pcb112.dtb > > targets += $(dtb-y) > > diff --git a/configs/mscc_jr2_defconfig b/configs/mscc_jr2_defconfig > new file mode 100644 > index 0000000..b215754 > --- /dev/null > +++ b/configs/mscc_jr2_defconfig > @@ -0,0 +1,59 @@ > +CONFIG_MIPS=y > +CONFIG_SYS_TEXT_BASE=0x40000000 > +CONFIG_SYS_MALLOC_F_LEN=0x2000 > +CONFIG_ARCH_MSCC=y > +CONFIG_SOC_JR2=y > +CONFIG_SYS_LITTLE_ENDIAN=y > +CONFIG_FIT=y > +CONFIG_BOOTDELAY=3 > +CONFIG_USE_BOOTARGS=y > +CONFIG_BOOTARGS="console=ttyS0,115200" > +CONFIG_LOGLEVEL=7 > +CONFIG_DISPLAY_CPUINFO=y > +CONFIG_SYS_PROMPT="jr2 # " > +# CONFIG_CMD_BDI is not set > +# CONFIG_CMD_CONSOLE is not set > +# CONFIG_CMD_ELF is not set > +# CONFIG_CMD_EXPORTENV is not set > +# CONFIG_CMD_IMPORTENV is not set > +# CONFIG_CMD_CRC32 is not set > +CONFIG_CMD_MD5SUM=y > +CONFIG_CMD_MEMINFO=y > +CONFIG_CMD_MEMTEST=y > +# CONFIG_CMD_FLASH is not set > +CONFIG_CMD_GPIO=y > +CONFIG_CMD_SF=y > +CONFIG_CMD_SPI=y > +# CONFIG_CMD_NET is not set > +CONFIG_CMD_MTDPARTS=y > +CONFIG_MTDIDS_DEFAULT="nor0=spi_flash" > +CONFIG_MTDPARTS_DEFAULT="mtdparts=spi_flash:1m(UBoot),256k(Env),256k(Env.bk)" > +# CONFIG_ISO_PARTITION is not set > +CONFIG_DEFAULT_DEVICE_TREE="jr2_pcb110" > +CONFIG_OF_LIST="jr2_pcb110 jr2_pcb111 serval2_pcb112" > +CONFIG_DTB_RESELECT=y > +CONFIG_MULTI_DTB_FIT=y > +CONFIG_ENV_IS_IN_SPI_FLASH=y > +CONFIG_NET_RANDOM_ETHADDR=y > +CONFIG_CLK=y > +CONFIG_DM_GPIO=y > +CONFIG_MSCC_SGPIO=y > +CONFIG_LED=y > +CONFIG_LED_GPIO=y > +CONFIG_DM_SPI_FLASH=y > +CONFIG_SPI_FLASH=y > +CONFIG_SPI_FLASH_BAR=y > +CONFIG_SPI_FLASH_GIGADEVICE=y > +CONFIG_SPI_FLASH_MACRONIX=y > +CONFIG_SPI_FLASH_SPANSION=y > +CONFIG_SPI_FLASH_WINBOND=y > +CONFIG_SPI_FLASH_MTD=y > +CONFIG_DM_ETH=y > +CONFIG_PINCTRL=y > +CONFIG_PINCONF=y > +CONFIG_DM_SERIAL=y > +CONFIG_SYS_NS16550=y > +CONFIG_SPI=y > +CONFIG_DM_SPI=y > +CONFIG_LZMA=y > +CONFIG_XZ=y > -- - Daniel _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
