On Sat, Jan 05, 2019 at 08:03:46PM +0200, Oskari Lemmela wrote: > Enable SPI bootcmd if CONFIG_DM_SPI_FLASH is defined. > > Signed-off-by: Oskari Lemmela <[email protected]> > --- > include/configs/sunxi-common.h | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > > diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h > index 9819d9980c..b2443ef678 100644 > --- a/include/configs/sunxi-common.h > +++ b/include/configs/sunxi-common.h > @@ -401,6 +401,21 @@ extern int soft_i2c_gpio_scl; > #define BOOT_TARGET_DEVICES_USB(func) > #endif > > +#ifdef CONFIG_DM_SPI_FLASH > +#define BOOT_TARGET_DEVICES_SPI(func) func(SPI, spi, 0) > +#define BOOTENV_DEV_SPI(devtypeu, devtypel, instance) \
This belongs more in include/config_distro_bootcmd.h, there's nothing
really sunxi specific here.
> + "image_addr=0x100000\0" \
> + "image_size=0x700000\0" \
image_addr and image_size usually come from Kconfig, instead of being
hardcoded
> + "bootcmd_" #devtypel #instance "=" \
> + "if sf probe " #instance "; then " \
> + "sf read ${ramdisk_addr_r} ${image_addr} ${image_size};
> " \
s/ramdisk_addr_r/kernel_addr_r/
Thanks!
Maxime
--
Maxime Ripard, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
signature.asc
Description: PGP signature
_______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
