On 08/01/2019 13:26, Peng Fan wrote:
-----Original Message-----
From: Bryan O'Donoghue [mailto:[email protected]]
Sent: 2019年1月3日 9:45
To: [email protected]
Cc: Fabio Estevam <[email protected]>; Peng Fan
<[email protected]>; Bryan O'Donoghue <[email protected]>;
Stefano Babic <[email protected]>
Subject: [PATCH 5/8] warp7: defconfig: Switch on IMX7 pinctrl for both
ports
Switches on the IMX7 pinctrl driver for the warp7 and warp7_bl33
ports, necessary to convert over to DM for this board.
Signed-off-by: Bryan O'Donoghue <[email protected]>
Cc: Peng Fan <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: Stefano Babic <[email protected]>
---
configs/warp7_bl33_defconfig | 2 ++
configs/warp7_defconfig | 2 ++
2 files changed, 4 insertions(+)
diff --git a/configs/warp7_bl33_defconfig
b/configs/warp7_bl33_defconfig index b2f943c775..a2c2555315 100644
--- a/configs/warp7_bl33_defconfig
+++ b/configs/warp7_bl33_defconfig
@@ -41,3 +41,5 @@ CONFIG_USB_ETH_CDC=y
CONFIG_USBNET_HOST_ADDR="de:ad:be:af:00:00"
CONFIG_OPTEE_TZDRAM_SIZE=0x2000000
CONFIG_DEFAULT_DEVICE_TREE="imx7s-warp"
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX7=y
diff --git a/configs/warp7_defconfig b/configs/warp7_defconfig index
65d801ffe2..8691d00491 100644
--- a/configs/warp7_defconfig
+++ b/configs/warp7_defconfig
@@ -54,3 +54,5 @@ CONFIG_OPTEE_TZDRAM_SIZE=0x3000000
CONFIG_OPTEE_TZDRAM_BASE=0x9d000000
CONFIG_BOOTM_OPTEE=y
CONFIG_DEFAULT_DEVICE_TREE="imx7s-warp"
+CONFIG_PINCTRL=y
+CONFIG_PINCTRL_IMX7=y
Reviewed-by: Peng Fan <[email protected]>
Just have a follow up question,
in patch 4/8, DM MMC is enabled, but in 5/8 pinctrl DM is enabled.
This might be not correct, the DM MMC/PINCTRL/GPIO needs to be in one patch.
The fsl_esdhc DM support does not support DM MMC with legacy iomux code.
Hmm.
OK, then I'll squash these.
_______________________________________________
U-Boot mailing list
[email protected]
https://lists.denx.de/listinfo/u-boot
