Signed-off-by: Lukasz Majewski <lu...@denx.de>
---
include/configs/bk4r1.h | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/include/configs/bk4r1.h b/include/configs/bk4r1.h
index bbd3e4e636..7bd3411ff2 100644
--- a/include/configs/bk4r1.h
+++ b/include/configs/bk4r1.h
@@ -189,6 +189,37 @@
"ubi part system; " \
"ubi write ${sys_addr} rootfs${active_workset} ${filesize}; " \
"ubi detach; fi\0" \
+ "setup_dtbkernel=nand erase.part dtbkernel; " \
+ "ubi part dtbkernel; " \
+ "ubi create dtbkernel1 972000 s; " \
+ "ubi create dtbkernel2 972000 s; " \
+ "ubi detach\0" \
+ "setup_system=nand erase.part system; " \
+ "ubi part system; " \
+ "ubi create rootfs1 15E15000 d; " \
+ "ubi create rootfs2 15E15000 d; " \
+ "ubi create userdata; " \
+ "ubi detach\0" \
+ "prepare_install_bk4r1_envs=" \
+ "echo 'Preparing envs for SD card recovery!';" \
+ "setenv ipaddr 192.168.0.99;" \
+ "setenv serverip 192.168.0.50;" \
+ "\0" \
+ "install_bk4r1rs="\
+ "led 0 on; " \
+ "nand erase.chip; mtdparts default; "\
+ "led 1 on; "\
+ "run setup_dtbkernel; " \
+ "run setup_system; " \
+ "led 2 on;" \
+ "run update_bootloader_from_sd; "\
+ "run update_dtbkernel_from_sd; "\
+ "run update_rootfs_from_sd; "\
+ "setenv bootcmd 'run bootcmd_nand'; "\
+ "saveenv; " \
+ "led 3 on; " \
+ "echo Finished - Please Power off, REMOVE SDCARD and set boot" \
+ "source to NAND\0" \
"active_workset=1\0"
/* Miscellaneous configurable options */
--
2.11.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
