Hi Tom/Stefano, On Sat, Dec 8, 2018 at 12:58 PM Fabio Estevam <feste...@gmail.com> wrote: > > Hi Jaehoon, > > On Mon, Nov 19, 2018 at 10:31 AM Fabio Estevam <feste...@gmail.com> wrote: > > > > The following hang is observed on a Hummingboard 2 MicroSOM > > i2eX iMX6D - rev 1.3 with no eMMC populated on board: > > > > U-Boot SPL 2018.11+gf6206f8587 (Nov 16 2018 - 00:56:34 +0000) > > Trying to boot from MMC1 > > > > U-Boot 2018.11+gf6206f8587 (Nov 16 2018 - 00:56:34 +0000) > > > > CPU: Freescale i.MX6D rev1.5 996 MHz (running at 792 MHz) > > CPU: Extended Commercial temperature grade (-20C to 105C) at 33C > > Reset cause: POR > > Board: MX6 HummingBoard2 > > DRAM: 1 GiB > > MMC: FSL_SDHC: 0, FSL_SDHC: 1 > > Loading Environment from MMC... *** Warning - bad CRC, using default > > environment > > > > No panel detected: default to HDMI > > Display: HDMI (1024x768) > > In: serial > > Out: serial > > Err: serial > > ---> hangs > > > > which is caused by the following infinite loop inside > > esdhc_send_cmd_common() > > > > while (!(esdhc_read32(®s->irqstat) & flags)) > > ; > > > > Instead of looping forever, provide an exit path so that a timeout > > error can be propagated in the case irqstat does not report > > any interrupts, which may happen when no eMMC is populated on > > board. > > > > Reported-by: Ricardo Salveti <rsalv...@rsalveti.net> > > Signed-off-by: Fabio Estevam <feste...@gmail.com> > > Could this one be applied to 2019.01?
I haven't heard back from Jaehoon. Can we have this one applied for 2019.01 in order to fix a regression? Thanks _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot