On Mon, Jan 14, 2019 at 8:49 PM Douglas Zobel <douglas.zo...@climate.com> wrote: > > I've made some changes to the fastboot handlers to meet my needs. If there > is interest, I can prepare patches and submit them upstream. The changes are: > > BUGFIX: Currently the 'fastboot format [partition]' command (run from PC) > formats the partition smaller than expected. Change getvar_partition_size() > to return partition size in # of bytes instead of the current behavior of # > of blocks. The 'fastboot format [partition]' command expect u-boot to return > the size in number of bytes in order to format the partition correctly. > > Make the a fastboot oem command handler with a dynamic lookup like the base > fastboot command handler currently is. This would allow easily adding new > oem commands in the baseline software (such as below). It would also allow > for board files to extend the oem handler to handle OEM specific cases. I > would use a weakly defined default oem command handler (empty function) which > a board file can optionally override to handle board specific commands. > > Currently the 'fastboot oem format' command (gpt write mmc # $partitions) is > supported. I'd like to add a 'fastboot oem verify' (gpt verify mmc # > $partitions) to help the flashing PC detect when a board needs to be > re-formatted. >
I'd no need for it, but when I did all of the changes to add UDP support, my intention was that you'd implement oem command using linker lists, at that point you can plug in whatever you need. -- Alex Kiernan _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
