On 19-01-16 12:14:34, Fabio Estevam wrote: > Hi Abel, > > On Wed, Jan 16, 2019 at 12:11 PM Abel Vesa <abel.v...@nxp.com> wrote: > > > > Add necessary dts and dtsi files in order to enable DM in both > > SPL and u-boot proper for mx6sabresd. > > > > Signed-off-by: Abel Vesa <abel.v...@nxp.com> > > --- > > arch/arm/dts/Makefile | 3 +- > > arch/arm/dts/imx6q-sabresd.dts | 92 ++++ > > arch/arm/dts/imx6qdl-sabresd.dtsi | 1065 > > +++++++++++++++++++++++++++++++++++++ > > 3 files changed, 1159 insertions(+), 1 deletion(-) > > create mode 100644 arch/arm/dts/imx6q-sabresd.dts > > create mode 100644 arch/arm/dts/imx6qdl-sabresd.dtsi > > > > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile > > index dad5436..1614a19 100644 > > --- a/arch/arm/dts/Makefile > > +++ b/arch/arm/dts/Makefile > > @@ -439,7 +439,8 @@ dtb-$(CONFIG_MX6QDL) += \ > > imx6q-icore-mipi.dtb \ > > imx6q-icore-rqs.dtb \ > > imx6q-logicpd.dtb \ > > - imx6q-sabreauto.dtb > > + imx6q-sabreauto.dtb \ > > + imx6q-sabresd.dtb > > Currently we support imx6q/imx6dl/imx6qp sabresd with the same U-Boot image. > > It seems that now you only support the imx6q variant, but we should > keep supporting all the variants.
Oups, my bad. Actually the files should've been named imx6sabreauto.dtb (same for sabresd). Without the 'q'. I tested on 6d and booted fine, so what I'm saying here is: this is meant for all the 6sabreauto. Will fix the names in the next version. I'll just wait a little longer for more comments and resend. Thanks _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot