Hi Daniel, The 01/16/2019 15:35, Daniel Schwierzeck wrote: > > > Am 15.01.19 um 17:33 schrieb Horatiu Vultur: > > Remove reset.c because it is not used anymore. It is superseed by > > sysreset driver. > > > > Signed-off-by: Horatiu Vultur <horatiu.vul...@microchip.com> > > --- > > arch/mips/mach-mscc/Makefile | 2 +- > > arch/mips/mach-mscc/include/mach/ddr.h | 18 ++++++++++++- > > arch/mips/mach-mscc/reset.c | 47 > > ---------------------------------- > > 3 files changed, 18 insertions(+), 49 deletions(-) > > delete mode 100644 arch/mips/mach-mscc/reset.c > > > > diff --git a/arch/mips/mach-mscc/Makefile b/arch/mips/mach-mscc/Makefile > > index f5b6968..349e889 100644 > > --- a/arch/mips/mach-mscc/Makefile > > +++ b/arch/mips/mach-mscc/Makefile > > @@ -2,6 +2,6 @@ > > > > CFLAGS_cpu.o += -finline-limit=64000 > > > > -obj-y += cpu.o dram.o reset.o phy.o lowlevel_init.o > > +obj-y += cpu.o dram.o phy.o lowlevel_init.o > > obj-$(CONFIG_SOC_LUTON) += lowlevel_init_luton.o gpio.o > > obj-$(CONFIG_SOC_OCELOT) += gpio.o > > diff --git a/arch/mips/mach-mscc/include/mach/ddr.h > > b/arch/mips/mach-mscc/include/mach/ddr.h > > index 7552acb..a2d20db 100644 > > --- a/arch/mips/mach-mscc/include/mach/ddr.h > > +++ b/arch/mips/mach-mscc/include/mach/ddr.h > > @@ -415,6 +415,22 @@ static inline void hal_vcoreiii_ddr_reset_release(void) > > sleep_100ns(10000); > > } > > > > +static void ocelot_restart(void) > > +{ > > + register u32 resetbits = PERF_SOFT_RST_SOFT_CHIP_RST; > > + (void)readl(BASE_DEVCPU_GCB + PERF_SOFT_RST); > > + > > + /* Make sure VCore is NOT protected from reset */ > > + clrbits_le32(BASE_CFG + ICPU_RESET, ICPU_RESET_CORE_RST_PROTECT); > > + > > + /* Change to SPI bitbang for SPI reset workaround... */ > > + writel(ICPU_SW_MODE_SW_SPI_CS_OE(1) | ICPU_SW_MODE_SW_SPI_CS(1) | > > + ICPU_SW_MODE_SW_PIN_CTRL_MODE, BASE_CFG + ICPU_SW_MODE); > > + > > + /* Do the global reset */ > > + writel(resetbits, BASE_DEVCPU_GCB + PERF_SOFT_RST); > > +} > > + > > /* > > * DDR memory sanity checking failed, tally and do hard reset > > * > > @@ -443,7 +459,7 @@ static inline void hal_vcoreiii_ddr_failed(void) > > * MIPS CPU (and the cache), and the CPU will start executing > > * from the reset vector. > > */ > > - reset = KSEG0ADDR(_machine_restart); > > + reset = KSEG0ADDR(ocelot_restart); > > ah I didn't thought about that when suggesting a sysreset driver.Then > it's maybe not a good idea at all. Or you export a function declaration > like mscc_cpu_reset(void) and implement it for each MSCC SoC. You could > call this still in hal_vcoreiii_ddr_failed() context. The sysreset > driver then simply wraps this function. But then it's not really worth > the overhead. Sorry for the troubles ;)
No problem, thanks for all the feedback :) One thingy is that after the patch[1] is accepted, I would like to send a new patch series for a new SoC. And this new SoC has a different reset mechanism which means that I need to put another #ifdef inside _machine_restart. For me it is perfectly fine not to accept this patch series and after I send the new patch series for new SoC to have another look at the function _machine_restart. [1] https://lists.denx.de/pipermail/u-boot/2019-January/354812.html > > > icache_lock((void *)reset, 128); > > asm volatile ("jr %0"::"r" (reset)); > > > > diff --git a/arch/mips/mach-mscc/reset.c b/arch/mips/mach-mscc/reset.c > > deleted file mode 100644 > > index e0e610a..0000000 > > --- a/arch/mips/mach-mscc/reset.c > > +++ /dev/null > > @@ -1,47 +0,0 @@ > > -// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > > -/* > > - * Copyright (c) 2018 Microsemi Corporation > > - */ > > - > > -#include <common.h> > > - > > -#include <asm/sections.h> > > -#include <asm/io.h> > > - > > -#include <asm/reboot.h> > > - > > -void _machine_restart(void) > > -{ > > -#if defined(CONFIG_SOC_JR2) > > - register u32 reg = readl(BASE_CFG + ICPU_GENERAL_CTRL); > > - /* Set owner */ > > - reg &= ~ICPU_GENERAL_CTRL_IF_SI_OWNER_M; > > - reg |= ICPU_GENERAL_CTRL_IF_SI_OWNER(1); > > - /* Set boot mode */ > > - reg |= ICPU_GENERAL_CTRL_BOOT_MODE_ENA; > > - writel(reg, BASE_CFG + ICPU_GENERAL_CTRL); > > - /* Read back in order to make BOOT mode setting active */ > > - reg = readl(BASE_CFG + ICPU_GENERAL_CTRL); > > - /* Reset CPU only - still executing _here_. but from cache */ > > - writel(readl(BASE_CFG + ICPU_RESET) | > > - ICPU_RESET_CORE_RST_CPU_ONLY | > > - ICPU_RESET_CORE_RST_FORCE, > > - BASE_CFG + ICPU_RESET); > > -#else > > - register u32 resetbits = PERF_SOFT_RST_SOFT_CHIP_RST; > > - (void)readl(BASE_DEVCPU_GCB + PERF_SOFT_RST); > > - > > - /* Make sure VCore is NOT protected from reset */ > > - clrbits_le32(BASE_CFG + ICPU_RESET, ICPU_RESET_CORE_RST_PROTECT); > > - > > - /* Change to SPI bitbang for SPI reset workaround... */ > > - writel(ICPU_SW_MODE_SW_SPI_CS_OE(1) | ICPU_SW_MODE_SW_SPI_CS(1) | > > - ICPU_SW_MODE_SW_PIN_CTRL_MODE, BASE_CFG + ICPU_SW_MODE); > > - > > - /* Do the global reset */ > > - writel(resetbits, BASE_DEVCPU_GCB + PERF_SOFT_RST); > > -#endif > > - > > - while (1) > > - ; /* NOP */ > > -} > > > > -- > - Daniel -- /Horatiu _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot