Hi Jagan, This is the patch I'm looking for, I try to enable u-boot.itb build but I failed with modify the legacy Makefile, thanks.
On 01/18/2019 01:57 AM, Jagan Teki wrote: > Add u-boot.itb BUILD_TARGET for Rockchip RK3368 and RK3399 > SoC, this can get rid of building itb explicitly with > 'make u-boot.itb' all required images will now build just > by make. > > Signed-off-by: Jagan Teki <ja...@amarulasolutions.com> > --- > Kconfig | 1 + > board/rockchip/evb_rk3399/README | 1 - > board/theobroma-systems/lion_rk3368/README | 9 ++------- > board/theobroma-systems/puma_rk3399/README | 1 - > board/vamrs/rock960_rk3399/README | 1 - > 5 files changed, 3 insertions(+), 10 deletions(-) > > diff --git a/Kconfig b/Kconfig > index 3a3a8d4d5b..247ace3ce0 100644 > --- a/Kconfig > +++ b/Kconfig > @@ -230,6 +230,7 @@ config BUILD_TARGET > default "u-boot-spl.kwb" if ARCH_MVEBU && SPL_BUILD > default "u-boot-elf.srec" if RCAR_GEN3 > default "u-boot.itb" if ARCH_SUNXI && ARM64 > + default "u-boot.itb" if ROCKCHIP_RK3368 || ROCKCHIP_RK3399 Can we use ARCH_ROCKCHIP && CONFIG_SPL_LOAD_FIT instead, so that we don't limit to these two SoCs, eg. rk3229 also need u-boot.itb while it's loads OP-TEE instead of ATF. Thanks, - Kever > help > Some SoCs need special image types (e.g. U-Boot binary > with a special header) as build targets. By defining > diff --git a/board/rockchip/evb_rk3399/README > b/board/rockchip/evb_rk3399/README > index 8321467046..c388f269c1 100644 > --- a/board/rockchip/evb_rk3399/README > +++ b/board/rockchip/evb_rk3399/README > @@ -58,7 +58,6 @@ Compile the U-Boot > for firefly-rk3399, use below instead: > > make firefly-rk3399_defconfig > > make > - > make u-boot.itb > > Get spl/u-boot-spl.bin and u-boot.itb in this step. > > diff --git a/board/theobroma-systems/lion_rk3368/README > b/board/theobroma-systems/lion_rk3368/README > index 83e4332984..241d4d9ec8 100644 > --- a/board/theobroma-systems/lion_rk3368/README > +++ b/board/theobroma-systems/lion_rk3368/README > @@ -14,18 +14,13 @@ Configure U-Boot > > cd ../u-boot > > make lion-rk3368_defconfig > > -Build the TPL/SPL stage > -======================= > +Build the TPL/SPL, U-Boot proper and a FIT image including the ATF > +================================================================== > > > make CROSS_COMPILE=aarch64-unknown-elf- ARCH=arm > > tools/mkimage -n rk3368 -T rksd -d tpl/u-boot-tpl.bin spl-3368.img > > cat spl/u-boot-spl-dtb.bin >> spl-3368.img > > -Build the full U-Boot and a FIT image including the ATF > -======================================================= > - > - > make CROSS_COMPILE=aarch64-unknown-elf- ARCH=arm u-boot.itb > - > Flash the image > =============== > > diff --git a/board/theobroma-systems/puma_rk3399/README > b/board/theobroma-systems/puma_rk3399/README > index f67dfb451f..c06c9650b8 100644 > --- a/board/theobroma-systems/puma_rk3399/README > +++ b/board/theobroma-systems/puma_rk3399/README > @@ -60,7 +60,6 @@ Creating a SPL image for SD-Card/eMMC > Creating a SPL image for SPI-NOR > > tools/mkimage -n rk3399 -T rkspi -d spl/u-boot-spl.bin spl_nor.img > Create the FIT image containing U-Boot proper, ATF, M0 Firmware, devicetree > - > make CROSS_COMPILE=aarch64-linux-gnu- u-boot.itb > > Flash the image > =============== > diff --git a/board/vamrs/rock960_rk3399/README > b/board/vamrs/rock960_rk3399/README > index d14399090e..c5c675c4ea 100644 > --- a/board/vamrs/rock960_rk3399/README > +++ b/board/vamrs/rock960_rk3399/README > @@ -61,7 +61,6 @@ Compile the U-Boot > > export CROSS_COMPILE=aarch64-linux-gnu- > > make rock960-rk3399_defconfig > > make > - > make u-boot.itb > > Compile the rkdeveloptool > ========================= _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot