Hi Stefan, > This patch series converts PCM052 and BK4 to use Driver Model and > Device Tree. > > Some notable changes: > - The way how MAC address is read from fuses can now be adjusted > - DTS improvement/sync with kernel (also extract u-boot specific > properties) > - Using generic code instead of one from board > > The output of u-boot boot: > U-Boot 2019.01-rc3-00076-gc149229be0 (Jan 14 2019 - 08:38:48 +0100) > > CPU: Freescale Vybrid VF610 at 396 MHz > Reset cause: POWER ON RESET > Model: Liebherr (LVF) BK4 Vybrid Board > Board: BK4r1 (L333) > DRAM: 512 MiB > NAND: 1024 MiB > MMC: FSL_SDHC: 0 > Loading Environment from NAND... OK > In: serial@40028000 > Out: serial@40028000 > Err: serial@40028000 > Net: eth0: fec@400d0000, eth1: fec@400d1000 > Enter passphrase to stop autoboot, booting in 3 seconds > > Buildman CI: > ./tools/buildman/buildman.py --branch=HEAD~4 vf610 mx6 vybrid > --detail --verbose --show_errors --force-build --count=21 > --output-dir=../BUILD/ > > Travis-CI: > https://travis-ci.org/lmajewski/u-boot-dfu/jobs/481963146
I've bisected this error, and it turned out that the following patch is the culprit (on top of which I've rebased my work): "fs: fat: dynamically allocate memory for temporary buffer" Without this patch applied: https://travis-ci.org/lmajewski/u-boot-dfu/builds/482301236 With: https://travis-ci.org/lmajewski/u-boot-dfu/builds/482297604 Test: test/py qemu_arm Error is in: "test_efi_selftest" Executing 'block device' /home/travis/build/lmajewski/u-boot-dfu/lib/efi_selftest/efi_selftest_block_device.c(386): TODO: Wrong volume label 'xxa1', expected 'U-BOOT TEST' /home/travis/build/lmajewski/u-boot-dfu/lib/efi_selftest/efi_selftest_block_device.c(413): ERROR: Unexpected file content /home/travis/build/lmajewski/u-boot-dfu/lib/efi_selftest/efi_selftest.c(110): ERROR: Executing 'block device' failed > > U-boot master branch: SHA1: c4d323793ba2e0616d93ca104e1e2b9a9fbccf9b > > > Changes in v2: > - Rename pcm052.dts to vf610-pcm052.dts > - Rename bk4r1.dts to vf610-bk4r1.dts > - Extract 'u-boot,dm-pre-reloc;' property to separate file (to > facilitate sync with Linux kernel dts files) > - New patch > - Disable EFI related support and commands (as we do not plan > to use EFI on this setup) > > Lukasz Majewski (21): > net: FEC: Add compatible for vybrid (vf610) to reuse fec_mxc.c > driver net: Kconfig: FEC: Add dependency on VF610 > vybrid: ddr: Extend vf610-pinfunc.h with DDR pads definitions > vybrid: clock: Provide enable_i2c_clk() function for Vybrid > vybrid: Define the imx_get_mac_from_fuse() as a __weak function > pcm052: board: Remove "m4go" command as it is superseded by > "bootaux" pcm052: board: vybrid: Update the board name for BK4 device > ARM: DTS: vybrid: Update vf.dtsi file to descibe more vf610 hardware > pcm052: board: cosmetic: Add copyright notice to pcm052.c > ARM: DTS: Update pcm052 based dts files (bk4r1/pcm052) > ARM: DTS: Provide vf610-bk4r1-u-boot.dtsi for U-Boot specific > properties > defconfig: bk4/pcm052: Update bk4r1|pcm052_defconfig to support > DM/DT config: pcm052: Use SZ_X{MK} from linux/sizes.h for > include/configs/pcm052.h > config: bk4: Update include/configs/bk4r1.h file > pcm052: board: Remove in-board setup code (it is now replaced by DM > setup) > config: bk4: Update u-boot script to support recovery via SD card > config: bk4: Update u-boot envs to support NOR memories initial > setup pcm052: bk4: sdcard: Add support for SD card booting/recovery > pcm052: board: Add code to setup LED default states > pcm052: mac: Provide board specific imx_get_mac_from_fuse() function > pcm052: bk4: Add board_phy_config() for BK4 to setup ksz8081 phy > > arch/arm/cpu/armv7/vf610/Kconfig | 1 + > arch/arm/cpu/armv7/vf610/generic.c | 21 +- > arch/arm/dts/Makefile | 4 +- > arch/arm/dts/bk4r1.dts | 47 ---- > arch/arm/dts/vf.dtsi | 62 +++++ > arch/arm/dts/vf610-bk4r1-u-boot.dtsi | 27 ++ > arch/arm/dts/vf610-bk4r1.dts | 97 +++++++ > arch/arm/dts/{pcm052.dts => vf610-pcm052.dts} | 6 +- > arch/arm/dts/vf610-pcm052.dtsi | 259 +++++++++++++++++ > arch/arm/dts/vf610-pinfunc.h | 50 ++++ > arch/arm/include/asm/arch-vf610/clock.h | 3 + > arch/arm/include/asm/arch-vf610/imx-regs.h | 2 + > board/phytec/pcm052/pcm052.c | 386 > ++++++-------------------- > configs/bk4r1_defconfig | 49 +++- > configs/pcm052_defconfig | 36 ++- > drivers/net/Kconfig | 2 +- > drivers/net/fec_mxc.c | 1 + > include/configs/bk4r1.h | 263 > +++++++++++++++++- include/configs/pcm052.h | > 51 +--- 19 files changed, 956 insertions(+), 411 deletions(-) delete > mode 100644 arch/arm/dts/bk4r1.dts create mode 100644 > arch/arm/dts/vf610-bk4r1-u-boot.dtsi create mode 100644 > arch/arm/dts/vf610-bk4r1.dts rename arch/arm/dts/{pcm052.dts => > vf610-pcm052.dts} (81%) create mode 100644 > arch/arm/dts/vf610-pcm052.dtsi > Best regards, Lukasz Majewski -- DENX Software Engineering GmbH, Managing Director: Wolfgang Denk HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: [email protected]
pgpcP0k1CYFjg.pgp
Description: OpenPGP digital signature
_______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
