On 15.01.19 12:50, Vladimir Vid wrote:
This adds initial support for micro-DPU (uDPU) board which is based on
Armada-3720 SoC.
micro-DPU is the single-port FTTdp "distribution point unit" made by Methode
Electronics
which offers complete modularity with replaceable SFP modules both for uplink
and downlink
(G.hn over twisted-pair, G.hn over coax, 1G and 2.5G Ethernet over Cat-5e
cable).
On-board features:
- 512 MiB DDR3
- 2 x 2.5G SFP via HSGMII SERDES interface to the A3720 SoC
- USB 2.0 Type-C connector
- 4GB eMMC
- ETSI TS 101548 reverse powering via twisted pair (RJ45) or coax (F Type)
Cc: Luka Perkov <luka.per...@sartura.hr>
Cc: Luis Torres <luis.tor...@methode.com>
Cc: Scott Roberts <scott.robe...@telus.com>
Cc: Paul Arola <paul.ar...@telus.com>
Signed-off-by: Vladimir Vid <vladimir....@sartura.hr>
Cc: Chris Packham <judge.pack...@gmail.com>
Cc: Stefan Roese <s...@denx.de>
---
v2:
- updated compatible string
- added 'u-boot,dm-pre-reloc' to spi0 and spi-flash nodes
- updated board defconfig (properly with savedefconfig this time)
- removed unused PCA driver from defconfig
This patch generates the following error:
drivers/mmc/mv_sdhci.c: In function ‘mv_sdh_init’:
drivers/mmc/mv_sdhci.c:91:9: warning: implicit declaration of function
‘add_sdhci’ [-Wimplicit-function-declaration]
return add_sdhci(host, 0, min_clk);
^~~~~~~~~
Please fix and resubmit.
Thanks,
Stefan
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot