Hi, On 20. 01. 19 12:29, Anton Gerasimov wrote: > Hi Michal, > >> I understand all of this but will be good to know what consumes that >> 0x5xx space and if we mark nodes properly that maybe something is not >> used and we should remove that marking. >> >> It means expected data is that uarts consumes 0xXXX, axi 0xXXX, sd >> 0xXXX, etc. > > measuring only the memory consumed in device_bind_common, I've got > the following results (in decimal): > > root_driver: 108 > mod_exp_sw: 108 > amba: 120 > serial@e0000000 aka uart0: 112 > serial@e0001000 aka uart1: 88 > spi@e000d000 aka qspi: 120 > sdhci@e0100000 aka mmc0: 455 > sd...@e0100000.blk: 208 > slcr@f8000000: 96 > clkc@100: 72 > (total) 1487 = 0x5cf of 0x600 > > So the most memory is being consumed by mmc0 (not quite sure what is > this '.blk' device, but it is probably also required), but it's not > dominating, other seemingly useful devices also have a decent share.
ok. Thanks for this list. I have extended that commit message with this and applied. We can look at these separately to find out if we can tune it a little bit. Thanks, Michal _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot