On 22-01-19 15:52, Michal Simek wrote: > On 22. 01. 19 14:51, Michal Simek wrote: >> Both boards have only controllers enabled that's why move to DM_I2C is >> easy. >> Add also i2c alias for Syzygy not to be shown as i2c bus -1 because >> alias doesn't exist. >> >> Signed-off-by: Michal Simek <[email protected]> >> --- >> >> arch/arm/dts/zynq-syzygy-hub.dts | 1 + >> configs/syzygy_hub_defconfig | 5 ++--- >> configs/topic_miami_defconfig | 5 ++--- >> configs/topic_miamilite_defconfig | 5 ++--- >> configs/topic_miamiplus_defconfig | 5 ++--- >> 5 files changed, 9 insertions(+), 12 deletions(-) >> >> diff --git a/arch/arm/dts/zynq-syzygy-hub.dts >> b/arch/arm/dts/zynq-syzygy-hub.dts >> index a30d667146d1..0f25cbe60923 100644 >> --- a/arch/arm/dts/zynq-syzygy-hub.dts >> +++ b/arch/arm/dts/zynq-syzygy-hub.dts >> @@ -16,6 +16,7 @@ >> ethernet0 = &gem0; >> serial0 = &uart0; >> mmc0 = &sdhci0; >> + i2c0 = &i2c1; >> }; >> >> memory@0 { >> diff --git a/configs/syzygy_hub_defconfig b/configs/syzygy_hub_defconfig >> index 75139d93b346..793156520021 100644 >> --- a/configs/syzygy_hub_defconfig >> +++ b/configs/syzygy_hub_defconfig >> @@ -17,7 +17,6 @@ CONFIG_BOOTCOMMAND="run $modeboot || run distro_bootcmd" >> CONFIG_SPL_STACK_R=y >> CONFIG_SPL_OS_BOOT=y >> CONFIG_SYS_PROMPT="Zynq> " >> -CONFIG_CMD_EEPROM=y >> # CONFIG_CMD_FLASH is not set >> CONFIG_CMD_FPGA_LOADBP=y >> CONFIG_CMD_FPGA_LOADFS=y >> @@ -36,8 +35,8 @@ CONFIG_SPL_DM_SEQ_ALIAS=y >> CONFIG_FPGA_XILINX=y >> CONFIG_FPGA_ZYNQPL=y >> CONFIG_DM_GPIO=y >> -CONFIG_SYS_I2C_ZYNQ=y >> -CONFIG_ZYNQ_I2C1=y >> +CONFIG_DM_I2C=y >> +CONFIG_SYS_I2C_CADENCE=y >> CONFIG_ZYNQ_GEM_I2C_MAC_OFFSET=0xFA >> CONFIG_MMC_SDHCI=y >> CONFIG_MMC_SDHCI_ZYNQ=y >> diff --git a/configs/topic_miami_defconfig b/configs/topic_miami_defconfig >> index 70d07ac041ae..927ce9ad2848 100644 >> --- a/configs/topic_miami_defconfig >> +++ b/configs/topic_miami_defconfig >> @@ -34,9 +34,8 @@ CONFIG_DFU_RAM=y >> CONFIG_FPGA_XILINX=y >> CONFIG_FPGA_ZYNQPL=y >> CONFIG_DM_GPIO=y >> -CONFIG_SYS_I2C_ZYNQ=y >> -CONFIG_ZYNQ_I2C0=y >> -CONFIG_ZYNQ_I2C1=y >> +CONFIG_DM_I2C=y >> +CONFIG_SYS_I2C_CADENCE=y >> CONFIG_MMC_SDHCI=y >> CONFIG_MMC_SDHCI_ZYNQ=y >> CONFIG_SPI_FLASH=y >> diff --git a/configs/topic_miamilite_defconfig >> b/configs/topic_miamilite_defconfig >> index 387f4cae0865..e4d52f6a915e 100644 >> --- a/configs/topic_miamilite_defconfig >> +++ b/configs/topic_miamilite_defconfig >> @@ -34,9 +34,8 @@ CONFIG_DFU_RAM=y >> CONFIG_FPGA_XILINX=y >> CONFIG_FPGA_ZYNQPL=y >> CONFIG_DM_GPIO=y >> -CONFIG_SYS_I2C_ZYNQ=y >> -CONFIG_ZYNQ_I2C0=y >> -CONFIG_ZYNQ_I2C1=y >> +CONFIG_DM_I2C=y >> +CONFIG_SYS_I2C_CADENCE=y >> CONFIG_MMC_SDHCI=y >> CONFIG_MMC_SDHCI_ZYNQ=y >> CONFIG_SPI_FLASH=y >> diff --git a/configs/topic_miamiplus_defconfig >> b/configs/topic_miamiplus_defconfig >> index d820fff501d1..f742838d7c1f 100644 >> --- a/configs/topic_miamiplus_defconfig >> +++ b/configs/topic_miamiplus_defconfig >> @@ -33,9 +33,8 @@ CONFIG_DFU_RAM=y >> CONFIG_FPGA_XILINX=y >> CONFIG_FPGA_ZYNQPL=y >> CONFIG_DM_GPIO=y >> -CONFIG_SYS_I2C_ZYNQ=y >> -CONFIG_ZYNQ_I2C0=y >> -CONFIG_ZYNQ_I2C1=y >> +CONFIG_DM_I2C=y >> +CONFIG_SYS_I2C_CADENCE=y >> CONFIG_MMC_SDHCI=y >> CONFIG_MMC_SDHCI_ZYNQ=y >> CONFIG_SPI_FLASH=y >> > > Note: this needs to be split because syzygy is not describing eeprom on > i2c. > Tom: Can you please tell me what eeprom you have on i2c? > Mike: Feel free to check this just for your boards.
Attempted to do that, but somehow I can no longer get buildman to work on any of my systems (ubuntu 14 and 18). Ah well, if it's okay on other boards it'll work on ours as well. :) _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
