Testing has shown that the timer on the MT7688 platforms does not run correctly (too fast timeout). This patch changes CONFIG_SYS_MIPS_TIMER_FREQ from 200MHz to 290MHz which is the correct value, as its also used in Linux.
Signed-off-by: Stefan Roese <s...@denx.de> Cc: Daniel Schwierzeck <daniel.schwierz...@gmail.com> --- include/configs/gardena-smart-gateway-mt7688.h | 2 +- include/configs/linkit-smart-7688.h | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-) diff --git a/include/configs/gardena-smart-gateway-mt7688.h b/include/configs/gardena-smart-gateway-mt7688.h index b10857a757..b3b89d2ab9 100644 --- a/include/configs/gardena-smart-gateway-mt7688.h +++ b/include/configs/gardena-smart-gateway-mt7688.h @@ -7,7 +7,7 @@ #define __CONFIG_GARDENA_SMART_GATEWAY_H /* CPU */ -#define CONFIG_SYS_MIPS_TIMER_FREQ 200000000 +#define CONFIG_SYS_MIPS_TIMER_FREQ 290000000 /* RAM */ #define CONFIG_SYS_SDRAM_BASE 0x80000000 diff --git a/include/configs/linkit-smart-7688.h b/include/configs/linkit-smart-7688.h index 3bae92d0ee..2adf38545a 100644 --- a/include/configs/linkit-smart-7688.h +++ b/include/configs/linkit-smart-7688.h @@ -7,7 +7,7 @@ #define __CONFIG_LINKIT_SMART_7688_H /* CPU */ -#define CONFIG_SYS_MIPS_TIMER_FREQ 200000000 +#define CONFIG_SYS_MIPS_TIMER_FREQ 290000000 /* RAM */ #define CONFIG_SYS_SDRAM_BASE 0x80000000 -- 2.20.1 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot