On Thu, Jan 31, 2019 at 7:58 AM Shyam Saini <sh...@amarulasolutions.com> wrote: > > Hi Adam, > > Thanks a lot for replying. > > > > > I spent some time trying to make the imx6q_logic board boot from SPL > > from NAND, but I needed to patch a few things. Some of them have yet > > to be approved, but if they work for you, maybe it will help get them > > approved. > > > > There was a broken function pointer here that was fixed and applied > > the imx-master, but pending merge with master > > http://patchwork.ozlabs.org/patch/1019440/ > > > > Configure ECC from SPL here: > > http://patchwork.ozlabs.org/patch/1020160/ > > > > Remove hard-coded ECC parameters since the patch above can autoset them. > > http://patchwork.ozlabs.org/patch/1026638/ > > > > With those 3 patches and some minor changes to my individual board > > file and config file, I was able to boot 2019.01 via SPL from NAND. > > Since it was working for you before, I am guessing the board file > > stuff and config file stuff is probably already for you. > > > I did apply the above mentioned 3 patches but nand boot is still not working. > > Here are debug enabled boot logs > https://paste.ubuntu.com/p/dmcwqzv6Sk/ > Your U-Boot version shows the version is U-Boot SPL 2016.09-rc2-gc347b70c408b which is a couple years old. Can you try 2019.01 with those patches I mentioned or the imx branch? I know there have been changes to U-Boot over time.
The last of the patches I applied to set the final configuration settings for my board to boot from NAND are here: http://patchwork.ozlabs.org/patch/1024016/ I don't know if that helps your board or not. adam > > Best Regards, > Shyam _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot