On 2/1/19 4:59 AM, Chee, Tien Fong wrote:
> On Thu, 2019-01-31 at 15:54 +0100, Marek Vasut wrote:
>> On 1/31/19 3:51 PM, tien.fong.c...@intel.com wrote:
>>>
>>> From: Tien Fong Chee <tien.fong.c...@intel.com>
>>>
>>> Add default fitImage file bundling FPGA bitstreams for Arria10.
>>>
>>> Signed-off-by: Tien Fong Chee <tien.fong.c...@intel.com>
>>> ---
>>> board/altera/arria10-socdk/fit_spl_fpga.its | 31
>>> +++++++++++++++++++++++++++++
>>> 1 file changed, 31 insertions(+)
>>> create mode 100644 board/altera/arria10-socdk/fit_spl_fpga.its
>>>
>>> diff --git a/board/altera/arria10-socdk/fit_spl_fpga.its
>>> b/board/altera/arria10-socdk/fit_spl_fpga.its
>>> new file mode 100644
>>> index 0000000..46b125c
>>> --- /dev/null
>>> +++ b/board/altera/arria10-socdk/fit_spl_fpga.its
>>> @@ -0,0 +1,31 @@
>>> +// SPDX-License-Identifier: GPL-2.0
>>> + /*
>>> + * Copyright (C) 2019 Intel Corporation <www.intel.com>
>>> + *
>>> + */
>>> +
>>> +/dts-v1/;
>>> +
>>> +/ {
>>> + description = "FIT image with FPGA bistream";
>>> + #address-cells = <1>;
>>> +
>>> + images {
>>> + fpga-2 {
>> Why is fpga-2 before fpga-1 ?
> 1. The main purpose is for solving the performance issue as i described
> in cover letter. We can decide the absolute data position for core
> image, and ensure it is in allignment.
Where does the alignment problem happen exactly ?
Anyway, you cannot rely on this, the alignment within the fitImage may
be changed just by using different strings in the ITS file.
> 2. Users know where is the data position for core, so easy for them to
> program themself with series commands on U-Boot console.
You should use imxtract to pull out the file from fitImage and then
program it. imxtract can refer to image name, so there's no need to
access raw data within the fitImage by offset.
>>> + description = "FPGA core bitstream";
>>> + data =
>>> /incbin/("../../../ghrd_10as066n2.core.rbf");
>>> + type = "fpga";
>>> + arch = "arm";
>>> + compression = "none";
>>> + load = <0x400>;
>>> + };
>>> +
>>> + fpga-1 {
>>> + description = "FPGA peripheral bitstream";
>>> + data =
>>> /incbin/("../../../ghrd_10as066n2.periph.rbf");
>>> + type = "fpga";
>>> + arch = "arm";
>>> + compression = "none";
>>> + };
>>> + };
>>> +};
>>>
--
Best regards,
Marek Vasut
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
