From: Marcel Ziswiler <marcel.ziswi...@toradex.com>
Keep debug code at the end of the function.
Use a one line informational message for the PMIC only.
Signed-off-by: Max Krummenacher <max.krummenac...@toradex.com>
Acked-by: Marcel Ziswiler <marcel.ziswi...@toradex.com>
---
Changes in v2: None
board/toradex/apalis_imx6/pf0100.c | 110 +++++++++++++++--------------
1 file changed, 56 insertions(+), 54 deletions(-)
diff --git a/board/toradex/apalis_imx6/pf0100.c
b/board/toradex/apalis_imx6/pf0100.c
index 3a944b3699..8106abf89a 100644
--- a/board/toradex/apalis_imx6/pf0100.c
+++ b/board/toradex/apalis_imx6/pf0100.c
@@ -35,7 +35,7 @@ unsigned pmic_init(void)
uchar bus = 1;
uchar devid, revid, val;
- puts("PMIC: ");
+ puts("PMIC: ");
rc = i2c_get_chip_for_busnum(bus, PFUZE100_I2C_ADDR, 1, &dev);
if (rc) {
printf("failed to get device for PMIC at address 0x%x\n",
@@ -51,57 +51,8 @@ unsigned pmic_init(void)
puts("i2c pmic revid read failed\n");
return 0;
}
- printf("device id: 0x%.2x, revision id: 0x%.2x\n", devid, revid);
+ printf("device id: 0x%.2x, revision id: 0x%.2x, ", devid, revid);
-#ifdef DEBUG
- {
- unsigned i, j;
-
- for (i = 0; i < 16; i++)
- printf("\t%x", i);
- for (j = 0; j < 0x80; ) {
- printf("\n%2x", j);
- for (i = 0; i < 16; i++) {
- dm_i2c_read(dev, j + i, &val, 1);
- printf("\t%2x", val);
- }
- j += 0x10;
- }
- printf("\nEXT Page 1");
-
- val = PFUZE100_PAGE_REGISTER_PAGE1;
- if (dm_i2c_write(dev, PFUZE100_PAGE_REGISTER, &val, 1)) {
- puts("i2c write failed\n");
- return 0;
- }
-
- for (j = 0x80; j < 0x100; ) {
- printf("\n%2x", j);
- for (i = 0; i < 16; i++) {
- dm_i2c_read(dev, j + i, &val, 1);
- printf("\t%2x", val);
- }
- j += 0x10;
- }
- printf("\nEXT Page 2");
-
- val = PFUZE100_PAGE_REGISTER_PAGE2;
- if (dm_i2c_write(dev, PFUZE100_PAGE_REGISTER, &val, 1)) {
- puts("i2c write failed\n");
- return 0;
- }
-
- for (j = 0x80; j < 0x100; ) {
- printf("\n%2x", j);
- for (i = 0; i < 16; i++) {
- dm_i2c_read(dev, j + i, &val, 1);
- printf("\t%2x", val);
- }
- j += 0x10;
- }
- printf("\n");
- }
-#endif /* DEBUG */
/* get device programmed state */
val = PFUZE100_PAGE_REGISTER_PAGE1;
if (dm_i2c_write(dev, PFUZE100_PAGE_REGISTER, &val, 1)) {
@@ -131,13 +82,13 @@ unsigned pmic_init(void)
switch (programmed) {
case 0:
- printf("PMIC: not programmed\n");
+ puts("not programmed\n");
break;
case 3:
- printf("PMIC: programmed\n");
+ puts("programmed\n");
break;
default:
- printf("PMIC: undefined programming state\n");
+ puts("undefined programming state\n");
break;
}
@@ -155,6 +106,57 @@ unsigned pmic_init(void)
if (dm_i2c_write(dev, PFUZE100_SWBSTCTL, &val, 1))
puts("i2c write failed\n");
}
+
+#ifdef DEBUG
+ {
+ unsigned int i, j;
+
+ for (i = 0; i < 16; i++)
+ printf("\t%x", i);
+ for (j = 0; j < 0x80; ) {
+ printf("\n%2x", j);
+ for (i = 0; i < 16; i++) {
+ dm_i2c_read(dev, j + i, &val, 1);
+ printf("\t%2x", val);
+ }
+ j += 0x10;
+ }
+ printf("\nEXT Page 1");
+
+ val = PFUZE100_PAGE_REGISTER_PAGE1;
+ if (dm_i2c_write(dev, PFUZE100_PAGE_REGISTER, &val, 1)) {
+ puts("i2c write failed\n");
+ return 0;
+ }
+
+ for (j = 0x80; j < 0x100; ) {
+ printf("\n%2x", j);
+ for (i = 0; i < 16; i++) {
+ dm_i2c_read(dev, j + i, &val, 1);
+ printf("\t%2x", val);
+ }
+ j += 0x10;
+ }
+ printf("\nEXT Page 2");
+
+ val = PFUZE100_PAGE_REGISTER_PAGE2;
+ if (dm_i2c_write(dev, PFUZE100_PAGE_REGISTER, &val, 1)) {
+ puts("i2c write failed\n");
+ return 0;
+ }
+
+ for (j = 0x80; j < 0x100; ) {
+ printf("\n%2x", j);
+ for (i = 0; i < 16; i++) {
+ dm_i2c_read(dev, j + i, &val, 1);
+ printf("\t%2x", val);
+ }
+ j += 0x10;
+ }
+ printf("\n");
+ }
+#endif /* DEBUG */
+
return programmed;
}
--
2.20.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
