Hi Marcel, > From: Bhuvanchandra DV <bhuvanchandra...@toradex.com> > > Switch to the generic compressed Kernel image type (zImage) instead of > the U-Boot specific uImage format. >
I would recommend switching to use fitImage instead of zImage.
You can look on display5 board for a reference.
> While at it also fix device tree naming for MMC DFU.
>
> Signed-off-by: Bhuvanchandra DV <bhuvanchandra...@toradex.com>
> Acked-by: Marcel Ziswiler <marcel.ziswi...@toradex.com>
>
> ---
>
> include/configs/colibri_imx6.h | 22 +++++++++++-----------
> 1 file changed, 11 insertions(+), 11 deletions(-)
>
> diff --git a/include/configs/colibri_imx6.h
> b/include/configs/colibri_imx6.h index 6e056aab31..a6a823ee1f 100644
> --- a/include/configs/colibri_imx6.h
> +++ b/include/configs/colibri_imx6.h
> @@ -108,17 +108,17 @@
> #include <config_distro_bootcmd.h>
> #undef BOOTENV_RUN_NET_USB_START
> #define BOOTENV_RUN_NET_USB_START ""
> -#else
> +#else /* CONFIG_SPL_BUILD */
> #define BOOTENV
> -#endif
> +#endif /* CONFIG_SPL_BUILD */
>
> #define DFU_ALT_EMMC_INFO \
> "u-boot.imx raw 0x2 0x3ff mmcpart 0;" \
> "boot part 0 1;" \
> "rootfs part 0 2;" \
> - "uImage fat 0 1;" \
> - "imx6q-colibri-eval-v3.dtb fat 0 1;" \
> - "imx6q-colibri-cam-eval-v3.dtb fat 0 1"
> + "zImage fat 0 1;" \
> + "imx6dl-colibri-eval-v3.dtb fat 0 1;" \
> + "imx6dl-colibri-cam-eval-v3.dtb fat 0 1"
>
> #define EMMC_BOOTCMD \
> "emmcargs=ip=off root=/dev/mmcblk0p2 rw,noatime
> rootfstype=ext4 " \ @@ -128,7 +128,7 @@
> "${vidargs}; echo Booting from internal eMMC
> chip...; " \ "run emmcdtbload; load mmc 0:1 ${kernel_addr_r} "
> \ "${boot_file} && run fdt_fixup && " \
> - "bootm ${kernel_addr_r} ${dtbparam}\0" \
> + "bootz ${kernel_addr_r} ${dtbparam}\0" \
> "emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \
> "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\"
> && true\0"
> @@ -148,11 +148,11 @@
> "setenv bootargs ${defargs} ${nfsargs} ${setupargs}
> " \ "${vidargs}; echo Booting via DHCP/TFTP/NFS...; " \
> "run nfsdtbload; dhcp ${kernel_addr_r} " \
> - "&& run fdt_fixup && bootm ${kernel_addr_r}
> ${dtbparam}\0" \
> + "&& run fdt_fixup && bootz ${kernel_addr_r}
> ${dtbparam}\0" \ "nfsdtbload=setenv dtbparam; tftp ${fdt_addr_r}
> ${fdt_file} " \ "&& setenv dtbparam \" - ${fdt_addr_r}\" && true\0"
>
> -#define SD_BOOTCMD \
> +#define SD_BOOTCMD \
> "sdargs=ip=off root=/dev/mmcblk1p2 rw,noatime
> rootfstype=ext4 " \ "rootwait\0" \
> "sdboot=run setup; " \
> @@ -160,7 +160,7 @@
> "${vidargs}; echo Booting from SD card; " \
> "run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
> "${boot_file} && run fdt_fixup && " \
> - "bootm ${kernel_addr_r} ${dtbparam}\0" \
> + "bootz ${kernel_addr_r} ${dtbparam}\0" \
> "sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \
> "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\"
> && true\0"
> @@ -171,7 +171,7 @@
> "${usbargs} ${vidargs}; echo Booting from USB
> stick...; " \ "usb start && run usbdtbload; load usb 0:1
> ${kernel_addr_r} " \ "${boot_file} && run fdt_fixup && " \
> - "bootm ${kernel_addr_r} ${dtbparam}\0" \
> + "bootz ${kernel_addr_r} ${dtbparam}\0" \
> "usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \
> "${fdt_file} && setenv dtbparam \" - ${fdt_addr_r}\"
> && true\0"
> @@ -182,7 +182,7 @@
> "run distro_bootcmd ; " \
> "usb start ; " \
> "setenv stdout serial,vga ; setenv stdin
> serial,usbkbd\0" \
> - "boot_file=uImage\0" \
> + "boot_file=zImage\0" \
> "console=ttymxc0\0" \
> "defargs=enable_wait_mode=off
> galcore.contiguousSize=50331648\0" \ "dfu_alt_info="
> DFU_ALT_EMMC_INFO "\0" \
Best regards,
Lukasz Majewski
--
DENX Software Engineering GmbH, Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-59 Fax: (+49)-8142-66989-80 Email: lu...@denx.de
pgpr0xejli1wq.pgp
Description: OpenPGP digital signature
_______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
