On 03.02.19 14:15, Baruch Siach wrote:
The dm_gpio_set_value() routine sets signal logical level, with
GPIO_ACTIVE_LOW/HIGH value taken into account. Reset active value is 1
(asserted), while reset inactive value is 0 (de-asserted). Fix the reset
toggle code to set the correct reset logic value.
Reported-by: Sven Auhagen <[email protected]>
Signed-off-by: Baruch Siach <[email protected]>
Applied to u-boot-marvell/master
Thanks,
Stefan
_______________________________________________
U-Boot mailing list
[email protected]
https://lists.denx.de/listinfo/u-boot
