Am Do., 21. Feb. 2019, 23:05 hat Marek Vasut <[email protected]> geschrieben:
> On 2/21/19 11:03 PM, Simon Goldschmidt wrote: > > > > > > Am Do., 21. Feb. 2019, 22:56 hat Marek Vasut <[email protected] > > <mailto:[email protected]>> geschrieben: > > > > On 2/21/19 10:43 PM, Simon Goldschmidt wrote: > > > The SPL for socfpga gen5 currently takes all peripherals out of > reset > > > unconditionally. To implement proper reset handling for > peripherals, > > > the reset node has to be provided with the SPL dts. > > > > > > In preparation to move the DDR driver to DM, the sdr node is > required > > > in SPL, too. > > > > > > This patch adds "u-boot,dm-pre-reloc" to U-Boot specific dtsi addon > > > files so that the reset manager and SDR driver correctly probe in > SPL. > > > > > > Signed-off-by: Simon Goldschmidt <[email protected] > > <mailto:[email protected]>> > > > --- > > > > > > Changes in v2: None > > > > > > arch/arm/dts/socfpga_arria5_socdk-u-boot.dtsi | 8 > ++++++++ > > > arch/arm/dts/socfpga_cyclone5_dbm_soc1.dts | 8 > ++++++++ > > > arch/arm/dts/socfpga_cyclone5_de0_nano_soc-u-boot.dtsi | 8 > ++++++++ > > > arch/arm/dts/socfpga_cyclone5_de10_nano.dts | 8 > ++++++++ > > > arch/arm/dts/socfpga_cyclone5_de1_soc.dts | 8 > ++++++++ > > > arch/arm/dts/socfpga_cyclone5_is1.dts | 8 > ++++++++ > > > arch/arm/dts/socfpga_cyclone5_socdk-u-boot.dtsi | 8 > ++++++++ > > > arch/arm/dts/socfpga_cyclone5_sockit-u-boot.dtsi | 8 > ++++++++ > > > arch/arm/dts/socfpga_cyclone5_socrates-u-boot.dtsi | 8 > ++++++++ > > > arch/arm/dts/socfpga_cyclone5_sr1500.dts | 8 > ++++++++ > > > arch/arm/dts/socfpga_cyclone5_vining_fpga-u-boot.dtsi | 8 > ++++++++ > > > 11 files changed, 88 insertions(+) > > > > > > diff --git a/arch/arm/dts/socfpga_arria5_socdk-u-boot.dtsi > > b/arch/arm/dts/socfpga_arria5_socdk-u-boot.dtsi > > > index c44d1ee2fa..8aaec56285 100644 > > > --- a/arch/arm/dts/socfpga_arria5_socdk-u-boot.dtsi > > > +++ b/arch/arm/dts/socfpga_arria5_socdk-u-boot.dtsi > > > @@ -17,6 +17,14 @@ > > > }; > > > }; > > > > > > +&rst { > > > + u-boot,dm-pre-reloc; > > > +}; > > > + > > > +&sdr { > > > + u-boot,dm-pre-reloc; > > > +}; > > > > What about some socfpga-common-u-boot.dtsi to avoid duplication ? > > > > > > Right. I tested with 'socfpga-u-boot.dtsi' but the hot included for > > gen10 as well. > > hot included ? I don't think I understand. > Argh. I'm writing from my mobile... What I meant was that file got included by the automatism so I couldn't use it. Regards, Simon > > But your suggested name should work fine I guess. > > > > Regards, > > Simon > > > > _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
