The environment variable preboot runs after splashimage, which other env variablecan I use, which runs before splashimage?
Best regards Radovan Vapenik > ------------ Původní zpráva ------------ > Od: Wolfgang Denk <w...@denx.de> > Předmět: Re: Re: [U-Boot] Splash screen problem > Datum: 29.4.2010 13:54:16 > ---------------------------------------- > Dear =?iso-8859-2?Q?Radovan=20V=E1pen=EDk?=, > > please make sure to keep the mailing list on Cc: > > In message <56290.4066.1012-16596-130053893-1272541...@seznam.cz> you wrote: > > Yes, it is bad address :-) > > Settings of splashimage: > > splashimage=nand read 25000000 C0000 20000 > > Well, this cannot work. > > As documented, "splashimage" is supposed to hold the address where the > image is stored in memory. > > > The enviroment variable "splashimage" runs the command to read from NAND, > > but i don't know how to tell (return) to splashimage the address of > > bitmap after reading from NAND. > > The command above reads the image to address 25000000 in RAM, so you > should define > > => setenv splashimage 25000000 > > Of course the reading from NAND must be done somewhere else, for > example as part of a "preboot" command. > > Best regards, > > Wolfgang Denk > > -- > DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel > HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany > Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: w...@denx.de > "The bad reputation UNIX has gotten is totally undeserved, laid on by > people who don't understand, who have not gotten in there and tried > anything." -- Jim Joyce, owner of Jim Joyce's UNIX Bookstore > > > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot