On Thu, Feb 21, 2019 at 11:03 AM Murali Karicheri <[email protected]> wrote: > > This patch adds dt node for DP83867 phy used on K2G ICE board and > also enable netcp device nodes for the board. > > EVM hardware spec recommends to add 0.25 nsec delay in the tx > direction and 2.25 nsec delay in the rx direction for internal > delay in the clock path to be on the safer side. > > The board straps RX_DV/RX_CTRL pin of on board DP83867 phy in mode > 1. Unfortunately, the phy data manual disallows this. Add > ti,dp83867-rxctrl-strap-quirk in the phy node to allow software to > enable workaround suggested for this incorrect strap setting. This > ensures proper operation of this PHY. > > The dts bindings are kept in sync with that from 4.14.y linux > kernel. This required the pinmux device related bindings to be > commented out to allow for compilation. > > Signed-off-by: Murali Karicheri <[email protected]>
Acked-by: Joe Hershberger <[email protected]> _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
