According to datasheet, the output on LDO regulators will start
appearing after 10-15 us.
Signed-off-by: Krzysztof Kozlowski <k...@kernel.org>
Tested-by: Anand Moon <linux.am...@gmail.com>
---
drivers/power/regulator/s2mps11_regulator.c | 11 ++++++++++-
1 file changed, 10 insertions(+), 1 deletion(-)
diff --git a/drivers/power/regulator/s2mps11_regulator.c
b/drivers/power/regulator/s2mps11_regulator.c
index 723d27f67c9a..67d1f9689de3 100644
--- a/drivers/power/regulator/s2mps11_regulator.c
+++ b/drivers/power/regulator/s2mps11_regulator.c
@@ -551,7 +551,16 @@ static int ldo_get_enable(struct udevice *dev)
static int ldo_set_enable(struct udevice *dev, bool enable)
{
- return s2mps11_ldo_enable(dev, PMIC_OP_SET, &enable);
+ int ret;
+
+ ret = s2mps11_ldo_enable(dev, PMIC_OP_SET, &enable);
+ if (ret)
+ return ret;
+
+ /* Wait the "enable delay" for voltage to start to rise */
+ udelay(15);
+
+ return 0;
}
static int ldo_get_mode(struct udevice *dev)
--
2.17.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
