On Tue, 2019-03-05 at 21:05 +0100, Simon Goldschmidt wrote: > Am 05.03.2019 um 17:23 schrieb tien.fong.c...@intel.com: > > > > From: Tien Fong Chee <tien.fong.c...@intel.com> > > > > After some series of patches to maximise reusable of memory pool, > > here come > > to result of reasonable size required for whole SDMMC boot working > > on A10 > > SoCDK. Size required come from default max cluster(0x10000) + > > others(0x2000) + additional memory for headroom(0x3000). > > > > Signed-off-by: Tien Fong Chee <tien.fong.c...@intel.com> > > > > --- > > > > changes for v7 > > - Added 0x3000 for memory headroom. > > --- > > include/configs/socfpga_common.h | 4 ++-- > > 1 file changed, 2 insertions(+), 2 deletions(-) > > > > diff --git a/include/configs/socfpga_common.h > > b/include/configs/socfpga_common.h > > index 4551cb29bc..548b458e78 100644 > > --- a/include/configs/socfpga_common.h > > +++ b/include/configs/socfpga_common.h > > @@ -1,6 +1,6 @@ > > /* SPDX-License-Identifier: GPL-2.0+ */ > > /* > > - * Copyright (C) 2012 Altera Corporation <www.altera.com> > > + * Copyright (C) 2012-2019 Altera Corporation <www.altera.com> > > */ > > #ifndef __CONFIG_SOCFPGA_COMMON_H__ > > #define __CONFIG_SOCFPGA_COMMON_H__ > > @@ -258,7 +258,7 @@ unsigned int > > cm_get_qspi_controller_clk_hz(void); > > #if defined(CONFIG_TARGET_SOCFPGA_ARRIA10) > > /* SPL memory allocation configuration, this is for FAT > > implementation */ > > #ifndef CONFIG_SYS_SPL_MALLOC_START > > -#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00010000 > > +#define CONFIG_SYS_SPL_MALLOC_SIZE 0x00015000 > This will clash with my series here: > https://patchwork.ozlabs.org/patch/1051451/ > > Any chance you could test that on A10? I only have a cyclone 5. > I have tested the series, and checking the failure from the codes, SPL_SYS_MALLOC_SIMPLE and SPL_SYS_MALLOC_F_LEN are not working in A10, because FPGA loading and distro boot from FAT FS require full malloc mechanism.
Thanks, TF. > > > > > > #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SYS_INIT_RAM_S > > IZE - \ > > CONFIG_SYS_SPL_MALLOC_SI > > ZE + \ > > CONFIG_SYS_INIT_RAM_ADDR > > ) > > _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot