Hi Tom,
These patches passed the CI build here:
https://travis-ci.org/jhershbe/u-boot/builds/501807294
The following changes since commit 2e8092d94f40a5692baf3ec768ce3216a7bf032a:
Merge branch 'master' of git://git.denx.de/u-boot-sunxi (2019-03-11 15:48:57
-0400)
are available in the git repository at:
git://git.denx.de/u-boot-net.git master
for you to fetch changes up to 85f05f72bacc2d047731fc648055551e4f6b34cf:
net: phy: aquantia: Set only autoneg on in register 4.c441 (2019-03-12
13:13:37 -0500)
----------------------------------------------------------------
Andrejs Cainikovs (2):
net: dm: fec: Support phy-reset-post-delay property
dts: imx8qxp-mek: Add PHY post reset delay
Carlo Caione (4):
net: phy: realtek: Introduce quirk to mark RXC not stoppable
net: phy: Add generic helpers to access MMD PHY registers
net: phy: ti: use generic helpers to access MMD registers
cmd: mdio: Switch to generic helpers when accessing the registers
James Byrne (2):
net: phy: micrel: Use correct skew values on KSZ9021
net: phy: micrel: Find Micrel PHY node correctly
Meenakshi Aggarwal (1):
mc : Reduce MC memory size to 128M
Murali Karicheri (7):
ARM: k2g-gp-evm: update to rgmii pinmux configuration
ARM: k2g-ice: Add pinmux support for rgmii interface
net: netcp: add support for phy with rgmii ids
ARM: k2g: add a workaround to reset the phy
ARM: dts: k2g-evm: remove unused phy-mode property from phy node
k2g: config enable ti phy dp83867 for k2g
ARM: dts: k2g-ice: add dt node for netcp
Pankaj Bansal (1):
drivers: net: ldpaa_eth: fix resource leak
Siva Durga Prasad Paladugu (2):
net: phy: Reloc next and prev pointers inside phy_drivers
net: phy: Fix return value check phy_probe
Valentin-catalin Neacsu (1):
net: phy: aquantia: Set only autoneg on in register 4.c441
Vladimir Oltean (6):
net: phy: ar803x: Address packet drops at low traffic rate due to
SmartEEE feature
net: phy: ar803x: Make RGMII Tx delays actually configurable for AR8035
net: phy: ar803x: Use common functions for RGMII internal delays
net: phy: ar803x: Clarify the configuration of the CLK_25M output pin
net: phy: ar803x: Explicitly disable RGMII delays
net: phy: ar803x: Clarify the intention of ar8021_config
arch/arm/dts/fsl-imx8qxp-mek.dts | 1 +
arch/arm/dts/keystone-k2g-evm.dts | 1 -
arch/arm/dts/keystone-k2g-ice.dts | 35 ++++++
arch/arm/dts/sama5d3xcm.dtsi | 32 ++---
arch/arm/dts/sama5d3xcm_cmp.dtsi | 32 ++---
arch/arm/dts/socfpga_arria5_socdk.dts | 4 +-
arch/arm/dts/socfpga_cyclone5_is1.dts | 4 +-
arch/arm/dts/socfpga_cyclone5_socdk.dts | 4 +-
arch/arm/dts/socfpga_cyclone5_sockit.dts | 4 +-
arch/arm/dts/socfpga_cyclone5_vining_fpga.dts | 4 +-
arch/arm/mach-keystone/include/mach/hardware-k2g.h | 3 +
arch/arm/mach-keystone/include/mach/mux-k2g.h | 5 +
board/ti/ks2_evm/board_k2g.c | 15 +++
board/ti/ks2_evm/mux-k2g.h | 51 +++++---
cmd/mdio.c | 27 +++--
configs/k2g_evm_defconfig | 1 +
doc/device-tree-bindings/net/micrel-ksz90x1.txt | 27 +++++
drivers/net/fec_mxc.c | 11 ++
drivers/net/fec_mxc.h | 1 +
drivers/net/fsl-mc/mc.c | 22 +++-
drivers/net/ldpaa_eth/ldpaa_eth.c | 1 +
drivers/net/phy/Kconfig | 41 +++++++
drivers/net/phy/aquantia.c | 7 +-
drivers/net/phy/atheros.c | 128 ++++++++++++++------
drivers/net/phy/micrel_ksz90x1.c | 24 +++-
drivers/net/phy/phy.c | 21 +++-
drivers/net/phy/realtek.c | 19 +++
drivers/net/phy/ti.c | 130 ++++-----------------
drivers/net/ti/keystone_net.c | 22 +++-
include/configs/ls1088a_common.h | 2 +-
include/configs/ls2080a_common.h | 2 +-
include/configs/lx2160a_common.h | 2 +-
include/phy.h | 70 +++++++++++
33 files changed, 526 insertions(+), 227 deletions(-)
Thanks!
-Joe
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
