Hi Mohammad, Thanks for patches,
Can you specify from which kernel release you sync'ed the DT ? On 14/03/2019 14:52, Mohammad Rasim wrote: > Signed-off-by: Mohammad Rasim <[email protected]> > --- > arch/arm/dts/Makefile | 2 + > arch/arm/dts/meson-gxbb-p200.dts | 99 ++++++++++++ > arch/arm/dts/meson-gxbb-p201.dts | 26 ++++ > arch/arm/dts/meson-gxbb-p20x.dtsi | 247 ++++++++++++++++++++++++++++++ > 4 files changed, 374 insertions(+) > create mode 100644 arch/arm/dts/meson-gxbb-p200.dts > create mode 100644 arch/arm/dts/meson-gxbb-p201.dts > create mode 100644 arch/arm/dts/meson-gxbb-p20x.dtsi > > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile > index 2a040b20a5..adf5f26fac 100644 > --- a/arch/arm/dts/Makefile > +++ b/arch/arm/dts/Makefile > @@ -60,6 +60,8 @@ dtb-$(CONFIG_ARCH_MESON) += \ > meson-gxbb-nanopi-k2.dtb \ > meson-gxbb-odroidc2.dtb \ > meson-gxbb-nanopi-k2.dtb \ > + meson-gxbb-p200.dtb \ > + meson-gxbb-p201.dtb \ > meson-gxl-s905x-p212.dtb \ > meson-gxl-s905x-libretech-cc.dtb \ > meson-gxl-s905x-khadas-vim.dtb \ > diff --git a/arch/arm/dts/meson-gxbb-p200.dts > b/arch/arm/dts/meson-gxbb-p200.dts > new file mode 100644 > index 0000000000..9d2406a7c4 > --- /dev/null > +++ b/arch/arm/dts/meson-gxbb-p200.dts > @@ -0,0 +1,99 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (c) 2016 Andreas Färber You should use format-patch and git send-email to send this patch, it will keep the UTF-8 encoding. > + * Copyright (c) 2016 BayLibre, Inc. > + * Author: Kevin Hilman <[email protected]> > + */ > + > +/dts-v1/; > + > +#include "meson-gxbb-p20x.dtsi" > +#include <dt-bindings/input/input.h> > + > +/ { > + compatible = "amlogic,p200", "amlogic,meson-gxbb"; > + model = "Amlogic Meson GXBB P200 Development Board"; > + > + avdd18_usb_adc: regulator-avdd18_usb_adc { > + compatible = "regulator-fixed"; > + regulator-name = "AVDD18_USB_ADC"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + adc_keys { > + compatible = "adc-keys"; > + io-channels = <&saradc 0>; > + io-channel-names = "buttons"; > + keyup-threshold-microvolt = <1800000>; > + > + button-home { > + label = "Home"; > + linux,code = <KEY_HOME>; > + press-threshold-microvolt = <900000>; /* 50% */ > + }; > + > + button-esc { > + label = "Esc"; > + linux,code = <KEY_ESC>; > + press-threshold-microvolt = <684000>; /* 38% */ > + }; > + > + button-up { > + label = "Volume Up"; > + linux,code = <KEY_VOLUMEUP>; > + press-threshold-microvolt = <468000>; /* 26% */ > + }; > + > + button-down { > + label = "Volume Down"; > + linux,code = <KEY_VOLUMEDOWN>; > + press-threshold-microvolt = <252000>; /* 14% */ > + }; > + > + button-menu { > + label = "Menu"; > + linux,code = <KEY_MENU>; > + press-threshold-microvolt = <0>; /* 0% */ > + }; > + }; > +}; > + > +ðmac { > + status = "okay"; > + pinctrl-0 = <ð_rgmii_pins>; > + pinctrl-names = "default"; > + phy-handle = <ð_phy0>; > + phy-mode = "rgmii"; > + > + amlogic,tx-delay-ns = <2>; > + > + snps,reset-gpio = <&gpio GPIOZ_14 0>; > + snps,reset-delays-us = <0 10000 1000000>; > + snps,reset-active-low; > + > + mdio { > + compatible = "snps,dwmac-mdio"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + eth_phy0: ethernet-phy@3 { > + /* Micrel KSZ9031 (0x00221620) */ > + reg = <3>; > + interrupt-parent = <&gpio_intc>; > + /* MAC_INTR on GPIOZ_15 */ > + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; > + }; > + }; > +}; > + > +&i2c_B { > + status = "okay"; > + pinctrl-0 = <&i2c_b_pins>; > + pinctrl-names = "default"; > +}; > + > +&saradc { > + status = "okay"; > + vref-supply = <&avdd18_usb_adc>; > +}; > diff --git a/arch/arm/dts/meson-gxbb-p201.dts > b/arch/arm/dts/meson-gxbb-p201.dts > new file mode 100644 > index 0000000000..56e0dd1ff5 > --- /dev/null > +++ b/arch/arm/dts/meson-gxbb-p201.dts > @@ -0,0 +1,26 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (c) 2016 Andreas Färber > + * Copyright (c) 2016 BayLibre, Inc. > + * Author: Kevin Hilman <[email protected]> > + */ > + > +/dts-v1/; > + > +#include "meson-gxbb-p20x.dtsi" > + > +/ { > + compatible = "amlogic,p201", "amlogic,meson-gxbb"; > + model = "Amlogic Meson GXBB P201 Development Board"; > +}; > + > +ðmac { > + status = "okay"; > + pinctrl-0 = <ð_rmii_pins>; > + pinctrl-names = "default"; > + phy-mode = "rmii"; > + > + snps,reset-gpio = <&gpio GPIOZ_14 0>; > + snps,reset-delays-us = <0 10000 1000000>; > + snps,reset-active-low; > +}; > diff --git a/arch/arm/dts/meson-gxbb-p20x.dtsi > b/arch/arm/dts/meson-gxbb-p20x.dtsi > new file mode 100644 > index 0000000000..0be0f2a5d2 > --- /dev/null > +++ b/arch/arm/dts/meson-gxbb-p20x.dtsi > @@ -0,0 +1,247 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (c) 2016 Andreas Färber > + * Copyright (c) 2016 BayLibre, Inc. > + * Author: Kevin Hilman <[email protected]> > + */ > + > +#include "meson-gxbb.dtsi" > + > +/ { > + aliases { > + serial0 = &uart_AO; > + ethernet0 = ðmac; > + }; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + memory@0 { > + device_type = "memory"; > + reg = <0x0 0x0 0x0 0x40000000>; > + }; > + > + usb_pwr: regulator-usb-pwrs { > + compatible = "regulator-fixed"; > + > + regulator-name = "USB_PWR"; > + > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + > + /* signal name in schematic: USB_PWR_EN */ > + gpio = <&gpio GPIODV_24 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; > + > + vddio_card: gpio-regulator { > + compatible = "regulator-gpio"; > + > + regulator-name = "VDDIO_CARD"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <3300000>; > + > + gpios = <&gpio_ao GPIOAO_5 GPIO_ACTIVE_HIGH>; > + gpios-states = <1>; > + > + /* Based on P200 schematics, signal CARD_1.8V/3.3V_CTR */ > + states = <1800000 0 > + 3300000 1>; > + > + regulator-settling-time-up-us = <10000>; > + regulator-settling-time-down-us = <150000>; > + }; > + > + vddio_boot: regulator-vddio_boot { > + compatible = "regulator-fixed"; > + regulator-name = "VDDIO_BOOT"; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; > + > + vddao_3v3: regulator-vddao_3v3 { > + compatible = "regulator-fixed"; > + regulator-name = "VDDAO_3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + vcc_3v3: regulator-vcc_3v3 { > + compatible = "regulator-fixed"; > + regulator-name = "VCC_3V3"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + }; > + > + emmc_pwrseq: emmc-pwrseq { > + compatible = "mmc-pwrseq-emmc"; > + reset-gpios = <&gpio BOOT_9 GPIO_ACTIVE_LOW>; > + }; > + > + wifi32k: wifi32k { > + compatible = "pwm-clock"; > + #clock-cells = <0>; > + clock-frequency = <32768>; > + pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */ > + }; > + > + sdio_pwrseq: sdio-pwrseq { > + compatible = "mmc-pwrseq-simple"; > + reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>; > + clocks = <&wifi32k>; > + clock-names = "ext_clock"; > + }; > + > + cvbs_connector: cvbs-connector { > + compatible = "composite-video-connector"; > + > + port { > + cvbs_connector_in: endpoint { > + remote-endpoint = <&cvbs_vdac_out>; > + }; > + }; > + }; > + > + hdmi-connector { > + compatible = "hdmi-connector"; > + type = "a"; > + > + port { > + hdmi_connector_in: endpoint { > + remote-endpoint = <&hdmi_tx_tmds_out>; > + }; > + }; > + }; > +}; > + > +&cec_AO { > + status = "okay"; > + pinctrl-0 = <&ao_cec_pins>; > + pinctrl-names = "default"; > + hdmi-phandle = <&hdmi_tx>; > +}; > + > +&cvbs_vdac_port { > + cvbs_vdac_out: endpoint { > + remote-endpoint = <&cvbs_connector_in>; > + }; > +}; > + > +&hdmi_tx { > + status = "okay"; > + pinctrl-0 = <&hdmi_hpd_pins>, <&hdmi_i2c_pins>; > + pinctrl-names = "default"; > +}; > + > +&hdmi_tx_tmds_port { > + hdmi_tx_tmds_out: endpoint { > + remote-endpoint = <&hdmi_connector_in>; > + }; > +}; > + > +&ir { > + status = "okay"; > + pinctrl-0 = <&remote_input_ao_pins>; > + pinctrl-names = "default"; > +}; > + > +&pwm_ef { > + status = "okay"; > + pinctrl-0 = <&pwm_e_pins>; > + pinctrl-names = "default"; > + clocks = <&clkc CLKID_FCLK_DIV4>; > + clock-names = "clkin0"; > +}; > + > +/* Wireless SDIO Module */ > +&sd_emmc_a { > + status = "okay"; > + pinctrl-0 = <&sdio_pins>; > + pinctrl-1 = <&sdio_clk_gate_pins>; > + pinctrl-names = "default", "clk-gate"; > + #address-cells = <1>; > + #size-cells = <0>; > + > + bus-width = <4>; > + cap-sd-highspeed; > + max-frequency = <100000000>; > + > + non-removable; > + disable-wp; > + > + mmc-pwrseq = <&sdio_pwrseq>; > + > + vmmc-supply = <&vddao_3v3>; > + vqmmc-supply = <&vddio_boot>; > + > + brcmf: wifi@1 { > + reg = <1>; > + compatible = "brcm,bcm4329-fmac"; > + }; > +}; > + > +/* SD card */ > +&sd_emmc_b { > + status = "okay"; > + pinctrl-0 = <&sdcard_pins>; > + pinctrl-1 = <&sdcard_clk_gate_pins>; > + pinctrl-names = "default", "clk-gate"; > + > + bus-width = <4>; > + cap-sd-highspeed; > + sd-uhs-sdr12; > + sd-uhs-sdr25; > + sd-uhs-sdr50; > + max-frequency = <100000000>; > + disable-wp; > + > + cd-gpios = <&gpio CARD_6 GPIO_ACTIVE_LOW>; > + > + vmmc-supply = <&vddao_3v3>; > + vqmmc-supply = <&vddio_card>; > +}; > + > +/* eMMC */ > +&sd_emmc_c { > + status = "okay"; > + pinctrl-0 = <&emmc_pins>, <&emmc_ds_pins>; > + pinctrl-1 = <&emmc_clk_gate_pins>; > + pinctrl-names = "default", "clk-gate"; > + > + bus-width = <8>; > + cap-mmc-highspeed; > + max-frequency = <200000000>; > + non-removable; > + disable-wp; > + mmc-ddr-1_8v; > + mmc-hs200-1_8v; > + > + mmc-pwrseq = <&emmc_pwrseq>; > + vmmc-supply = <&vcc_3v3>; > + vqmmc-supply = <&vddio_boot>; > +}; > + > +/* This UART is brought out to the DB9 connector */ > +&uart_AO { > + status = "okay"; > + pinctrl-0 = <&uart_ao_a_pins>; > + pinctrl-names = "default"; > +}; > + > +&usb0_phy { > + status = "okay"; > + phy-supply = <&usb_pwr>; > +}; > + > +&usb1_phy { > + status = "okay"; > +}; > + > +&usb0 { > + status = "okay"; > +}; > + > +&usb1 { > + status = "okay"; > +}; > -- > 2.21.0 > _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
