Drop the counter, it has no meaning other than being the order in which
the interface is found; the name assigned to the USB host controller
interface is a better indicator.
Example of the original output:
> USB0: USB EHCI 1.10
> scanning bus 0 for devices... 2 USB Device(s) found
> scanning usb for storage devices... 1 Storage Device(s) found
Patched output:
> Bus usb@ee080100: USB EHCI 1.10
> scanning bus 0 for devices... 2 USB Device(s) found
> scanning usb for storage devices... 1 Storage Device(s) found
Signed-off-by: Ismael Luceno <ismael.luc...@silicon-gears.com>
---
Notes:
Changes since v2:
- Dropped counter altogether.
Changes since v1:
- Improved commit message.
drivers/usb/host/usb-uclass.c | 10 +++-------
1 file changed, 3 insertions(+), 7 deletions(-)
diff --git a/drivers/usb/host/usb-uclass.c b/drivers/usb/host/usb-uclass.c
index 611ea97a72..a7179abc3a 100644
--- a/drivers/usb/host/usb-uclass.c
+++ b/drivers/usb/host/usb-uclass.c
@@ -242,7 +242,6 @@ int usb_init(void)
struct usb_bus_priv *priv;
struct udevice *bus;
struct uclass *uc;
- int count = 0;
int ret;
asynch_allowed = 1;
@@ -255,8 +254,7 @@ int usb_init(void)
uclass_foreach_dev(bus, uc) {
/* init low_level USB */
- printf("USB%d: ", count);
- count++;
+ printf("Bus %s: ", bus->name);
#ifdef CONFIG_SANDBOX
/*
@@ -327,10 +325,8 @@ int usb_init(void)
remove_inactive_children(uc, bus);
/* if we were not able to find at least one working bus, bail out */
- if (!count)
- printf("No controllers found\n");
- else if (controllers_initialized == 0)
- printf("USB error: all controllers failed lowlevel init\n");
+ if (controllers_initialized == 0)
+ printf("No working controllers found\n");
return usb_started ? 0 : -1;
}
--
2.19.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
