From: Thierry Reding <tred...@nvidia.com>
The save_boot_params() function takes as its first four arguments the
first four registers. On 32-bit ARM these are r0, r1, r2 and r3, all of
which are 32 bits wide. However, on 64-bit ARM thene registers are x0,
x1, x2 and x3, all of which are 64 bits wide. In order to allow reusing
the save_boot_params() implementation on 64-bit ARM, change it to take
unsigned long parameters rather than the fixed size 32-bit integers.
This ensures that the correct values are passed.
Signed-off-by: Thierry Reding <tred...@nvidia.com>
---
arch/arm/mach-tegra/board.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/arch/arm/mach-tegra/board.c b/arch/arm/mach-tegra/board.c
index b65bdde5a78d..59d2f347485d 100644
--- a/arch/arm/mach-tegra/board.c
+++ b/arch/arm/mach-tegra/board.c
@@ -42,7 +42,8 @@ enum {
static bool from_spl __attribute__ ((section(".data")));
#ifndef CONFIG_SPL_BUILD
-void save_boot_params(u32 r0, u32 r1, u32 r2, u32 r3)
+void save_boot_params(unsigned long r0, unsigned long r1, unsigned long r2,
+ unsigned long r3)
{
from_spl = r0 != UBOOT_NOT_LOADED_FROM_SPL;
save_boot_params_ret();
--
2.21.0
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
