Hello Fabio, Adding Marek as he is one of USB gods.
On Fri, Mar 22, 2019 at 3:01 PM Fabio Estevam <feste...@gmail.com> wrote: > On Fri, Mar 22, 2019 at 2:53 PM Otavio Salvador <ota...@ossystems.com.br> > wrote: > So you need to fix the README in two points: > > 1. The command "=> dfu 0 mmc 0" must be issued twice: one for the SPL > and one for u-boot-dtb.img - This error was there prior to your change I fail to see why this would be need. Also the 'mmc partconf' does not affect where the DFU writes the blog (this is changed depending on the dfu_alt_info line). > 2. The '=> mmc partconf 0 0 0 0' command needs to be issued after the > last dfu command, not before like you did in this patch. Read above. I wonder why it works here and fails for you. Are you booting from USB or eMMC when running the DFU? What version are you using? -- Otavio Salvador O.S. Systems http://www.ossystems.com.br http://code.ossystems.com.br Mobile: +55 (53) 9 9981-7854 Mobile: +1 (347) 903-9750 _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
