Hi, Le 15/03/2019 16:19, Mohammad Rasim a écrit : > This adds the p200 defconfig > > Signed-off-by: Mohammad Rasim <mohammad.rasi...@gmail.com> > --- > configs/p200_defconfig | 41 +++++++++++++++++++++++++++++++++++++++++ > 1 file changed, 41 insertions(+) > create mode 100644 configs/p200_defconfig > > diff --git a/configs/p200_defconfig b/configs/p200_defconfig > new file mode 100644 > index 000000000000..3980e4eb5f1d > --- /dev/null > +++ b/configs/p200_defconfig > @@ -0,0 +1,41 @@ > +CONFIG_ARM=y > +CONFIG_ARCH_MESON=y > +CONFIG_SYS_TEXT_BASE=0x01000000 > +CONFIG_DEBUG_UART_BASE=0xc81004c0 > +CONFIG_DEBUG_UART_CLOCK=24000000 > +CONFIG_IDENT_STRING=" p200" > +CONFIG_DEBUG_UART=y > +CONFIG_NR_DRAM_BANKS=1 > +CONFIG_OF_BOARD_SETUP=y > +CONFIG_MISC_INIT_R=y > +# CONFIG_DISPLAY_CPUINFO is not set > +# CONFIG_DISPLAY_BOARDINFO is not set > +# CONFIG_CMD_BDI is not set > +# CONFIG_CMD_IMI is not set > +CONFIG_CMD_GPIO=y > +CONFIG_CMD_I2C=y > +# CONFIG_CMD_LOADS is not set > +CONFIG_CMD_MMC=y > +# CONFIG_CMD_SETEXPR is not set > +CONFIG_CMD_REGULATOR=y > +CONFIG_OF_CONTROL=y > +CONFIG_DEFAULT_DEVICE_TREE="meson-gxbb-p200" > +CONFIG_NET_RANDOM_ETHADDR=y > +CONFIG_DM_GPIO=y > +CONFIG_DM_I2C=y > +CONFIG_SYS_I2C_MESON=y > +CONFIG_DM_MMC=y > +CONFIG_MMC_MESON_GX=y > +CONFIG_DM_ETH=y > +CONFIG_ETH_DESIGNWARE=y > +CONFIG_PINCTRL=y > +CONFIG_PINCTRL_MESON_GXBB=y > +CONFIG_DM_REGULATOR=y > +CONFIG_DM_REGULATOR_FIXED=y > +CONFIG_DM_RESET=y > +CONFIG_DEBUG_UART_MESON=y > +CONFIG_DEBUG_UART_ANNOUNCE=y > +CONFIG_DEBUG_UART_SKIP_INIT=y > +CONFIG_MESON_SERIAL=y > +CONFIG_OF_LIBFDT_OVERLAY=y > +CONFIG_SYS_BOARD="p200" > -- > 2.21.0 >
Can you update the configs/p200_defconfig here instead of the first patch ? Thanks, Neil _______________________________________________ U-Boot mailing list U-Boot@lists.denx.de https://lists.denx.de/listinfo/u-boot
