From: Siva Durga Prasad Paladugu <siva.durga.palad...@xilinx.com>
The phydev supported features were reset in phy_set_supported() so,
move the setting of driver supported features after this so that it
wont lost in phy_set_supported().
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.palad...@xilinx.com>
Signed-off-by: Michal Simek <michal.si...@xilinx.com>
---
drivers/net/zynq_gem.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/zynq_gem.c b/drivers/net/zynq_gem.c
index e783773493c6..1be268f11743 100644
--- a/drivers/net/zynq_gem.c
+++ b/drivers/net/zynq_gem.c
@@ -361,14 +361,15 @@ static int zynq_phy_init(struct udevice *dev)
if (!priv->phydev)
return -ENODEV;
- priv->phydev->supported &= supported | ADVERTISED_Pause |
- ADVERTISED_Asym_Pause;
if (priv->max_speed) {
ret = phy_set_supported(priv->phydev, priv->max_speed);
if (ret)
return ret;
}
+ priv->phydev->supported &= supported | ADVERTISED_Pause |
+ ADVERTISED_Asym_Pause;
+
priv->phydev->advertising = priv->phydev->supported;
priv->phydev->node = priv->phy_of_node;
--
1.9.1
_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot
