Hi Adam, On Sun, Jan 13, 2019 at 5:02 AM Adam Ford <[email protected]> wrote: > > The Ethernet has been broken for some time. This patch unifies > this board with a few others that use a similar approach to > enabling phy. This fixes ar8031 Ethernet controller so it works. > > Signed-off-by: Adam Ford <[email protected]> > > diff --git a/board/logicpd/imx6/imx6logic.c b/board/logicpd/imx6/imx6logic.c > index cda76a8084..eb4849117d 100644 > --- a/board/logicpd/imx6/imx6logic.c > +++ b/board/logicpd/imx6/imx6logic.c > @@ -60,57 +60,6 @@ static iomux_v3_cfg_t const uart3_pads[] = { > MX6_PAD_EIM_EB3__UART3_RTS_B | MUX_PAD_CTRL(UART_PAD_CTRL), > }; > > -#ifndef CONFIG_SPL_BUILD > -static void fixup_enet_clock(void) > -{ > - struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; > - struct gpio_desc nint; > - struct gpio_desc reset; > - int ret; > - > - /* Set Ref Clock to 50 MHz */ > - enable_fec_anatop_clock(0, ENET_50MHZ);
I just wonder why the fec working w/o ene_ref set rate to 50MHz, any idea? _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
