Hi Christophe, > > This patchset adds the support for the STMicroelectronics FMC2 NAND flash > controller found on STM32MP SOCs. > > This patchset supports: > - the polling mode feature > - a maximum 8k page size > - following ECC strength and step size > - nand-ecc-strength = <8>, nand-ecc-step-size = <512> (BCH8) > - nand-ecc-strength = <4>, nand-ecc-step-size = <512> (BCH4) > - nand-ecc-strength = <1>, nand-ecc-step-size = <512> (Extended > ecc based on HAMMING) > > This patchset has been tested on Micron MT29F8G08ABACAH4 (8-bit SLC > NAND). > > Changes in v2: > - fix oob free offset > > Christophe Kerello (2): > dt-bindings: mtd: stm32_fmc2: add STM32 FMC2 NAND controller > documentation > mtd: rawnand: stm32_fmc2: add STM32 FMC2 NAND flash controller driver > > doc/device-tree-bindings/mtd/stm32-fmc2-nand.txt | 59 ++ > drivers/mtd/nand/raw/Kconfig | 11 + > drivers/mtd/nand/raw/Makefile | 1 + > drivers/mtd/nand/raw/stm32_fmc2_nand.c | 1092 > ++++++++++++++++++++++ > 4 files changed, 1163 insertions(+) > create mode 100644 doc/device-tree-bindings/mtd/stm32-fmc2-nand.txt > create mode 100644 drivers/mtd/nand/raw/stm32_fmc2_nand.c > > -- > 1.9.1
For the serie and for stm32m1: tested on STM32MP157c-EV1 board on the branch https://github.com/patrickdelaunay/u-boot/tree/v2019.04-stm32mp Tested-by: Patrick DELAUNAY <[email protected]> Reviewed-by: Patrick DELAUNAY <[email protected]> Regards Patrick _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
