[U-Boot] [PATCH 4/4] arm: dts: h6: minor sync with linux

[Clément Péron]

There are some minor differences between U-Boot and Linux.

Sync only the minor changes.

Signed-off-by: Clément Péron <peron.c...@gmail.com>
---
 arch/arm/dts/sun50i-h6.dtsi | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/arch/arm/dts/sun50i-h6.dtsi b/arch/arm/dts/sun50i-h6.dtsi
index 617cea35d1..5f01314703 100644
--- a/arch/arm/dts/sun50i-h6.dtsi
+++ b/arch/arm/dts/sun50i-h6.dtsi
@@ -19,28 +19,28 @@
                #size-cells = <0>;
 
                cpu0: cpu@0 {
-                       compatible = "arm,cortex-a53", "arm,armv8";
+                       compatible = "arm,cortex-a53";
                        device_type = "cpu";
                        reg = <0>;
                        enable-method = "psci";
                };
 
                cpu1: cpu@1 {
-                       compatible = "arm,cortex-a53", "arm,armv8";
+                       compatible = "arm,cortex-a53";
                        device_type = "cpu";
                        reg = <1>;
                        enable-method = "psci";
                };
 
                cpu2: cpu@2 {
-                       compatible = "arm,cortex-a53", "arm,armv8";
+                       compatible = "arm,cortex-a53";
                        device_type = "cpu";
                        reg = <2>;
                        enable-method = "psci";
                };
 
                cpu3: cpu@3 {
-                       compatible = "arm,cortex-a53", "arm,armv8";
+                       compatible = "arm,cortex-a53";
                        device_type = "cpu";
                        reg = <3>;
                        enable-method = "psci";
@@ -143,7 +143,7 @@
                                bias-pull-up;
                        };
 
-                       uart0_ph_pins: uart0-ph {
+                       uart0_ph_pins: uart0-ph-pins {
                                pins = "PH0", "PH1";
                                function = "uart0";
                        };
@@ -270,7 +270,7 @@
                        interrupt-controller;
                        #interrupt-cells = <3>;
 
-                       r_i2c_pins: r-i2c {
+                       r_i2c_pins: r-i2c-pins {
                                pins = "PL0", "PL1";
                                function = "s_i2c";
                        };
-- 
2.17.1

_______________________________________________
U-Boot mailing list
U-Boot@lists.denx.de
https://lists.denx.de/listinfo/u-boot