On 10. 04. 19 9:26, Melin Tomas wrote: > Update EXTRA_ENV_SETTINGS and related commands to use 'setenv' > instead of short name 'set' in commands. > > E.g. in case command setexpr is enabled the short form does not work > properly as the name becomes ambigous. > > Fixes error messages like: > > U-Boot> set > Unknown command 'set' - try 'help' > > Signed-off-by: Tomas Melin <[email protected]> > --- > include/configs/zynq-common.h | 8 ++++---- > 1 file changed, 4 insertions(+), 4 deletions(-) > > diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h > index 864f3220f3..6e7431d220 100644 > --- a/include/configs/zynq-common.h > +++ b/include/configs/zynq-common.h > @@ -70,7 +70,7 @@ > # define CONFIG_THOR_RESET_OFF > # define DFU_ALT_INFO_RAM \ > "dfu_ram_info=" \ > - "set dfu_alt_info " \ > + "setenv dfu_alt_info " \ > "${kernel_image} ram 0x3000000 0x500000\\\\;" \ > "${devicetree_image} ram 0x2A00000 0x20000\\\\;" \ > "${ramdisk_image} ram 0x2000000 0x600000\0" \ > @@ -80,7 +80,7 @@ > # if defined(CONFIG_MMC_SDHCI_ZYNQ) > # define DFU_ALT_INFO_MMC \ > "dfu_mmc_info=" \ > - "set dfu_alt_info " \ > + "setenv dfu_alt_info " \ > "${kernel_image} fat 0 1\\\\;" \ > "${devicetree_image} fat 0 1\\\\;" \ > "${ramdisk_image} fat 0 1\0" \ > @@ -187,9 +187,9 @@ > "env run importbootenv; " \ > "fi; " \ > "fi; \0" \ > - "sd_loadbootenv=set bootenv_dev mmc && " \ > + "sd_loadbootenv=setenv bootenv_dev mmc && " \ > "run setbootenv \0" \ > - "usb_loadbootenv=set bootenv_dev usb && usb start && run setbootenv \0" > \ > + "usb_loadbootenv=setenv bootenv_dev usb && usb start && run setbootenv > \0" \ > "preboot=if test $modeboot = sdboot; then " \ > "run sd_loadbootenv; " \ > "echo Checking if uenvcmd is set ...; " \ >
applied. M _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
