On Thu, 11 Apr 2019, 10:33 PM Stefan Roese, <[email protected]> wrote: > We have run now multiple times into size issues with the openrd > board port. To finally fix this, this patch now moves the U-Boot size > from 0x6.0000 to 0x8.0000, giving enough space for the next time. > > This also changes the environment location and potentially the > MTD partitioning, but I see no better fix for now. Especially since > this board does not have an active maintainer. > > Signed-off-by: Stefan Roese <[email protected]> > Cc: Chris Packham <[email protected]>
One alternative option I looked at was trimming down the dtb to drop the nodes that aren't used in u-boot. This might just get it under the 0x60000 limit ... for a while. I agree that this is the best approach in leiu of anyone maintiaining the board. Once this is applied the openrd boards can be reenabled in travis. Reviewed-by: Chris Packham <[email protected]> --- > include/configs/openrd.h | 2 +- > 1 file changed, 1 insertion(+), 1 deletion(-) > > diff --git a/include/configs/openrd.h b/include/configs/openrd.h > index c96d4c4d48..62d8862cc7 100644 > --- a/include/configs/openrd.h > +++ b/include/configs/openrd.h > @@ -41,7 +41,7 @@ > * it has to be rounded to sector size > */ > #define CONFIG_ENV_SIZE 0x20000 /* 128k */ > -#define CONFIG_ENV_OFFSET 0x60000 /* env starts here */ > +#define CONFIG_ENV_OFFSET 0x80000 /* env starts here */ > /* > * Environment is right behind U-Boot in flash. Make sure U-Boot > * doesn't grow into the environment area. > -- > 2.21.0 > > _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
