From: Thierry Reding <[email protected]> Add an "ethernet" alias that points to the default network interface, which is the built-in EQoS on Jetson TX2.
Signed-off-by: Thierry Reding <[email protected]> --- arch/arm/dts/tegra186-p2771-0000.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/dts/tegra186-p2771-0000.dtsi b/arch/arm/dts/tegra186-p2771-0000.dtsi index a1319dc4936f..7cda0b41f74b 100644 --- a/arch/arm/dts/tegra186-p2771-0000.dtsi +++ b/arch/arm/dts/tegra186-p2771-0000.dtsi @@ -9,6 +9,7 @@ }; aliases { + ethernet = "/ethernet@2490000"; mmc0 = "/sdhci@3460000"; mmc1 = "/sdhci@3400000"; i2c0 = "/bpmp/i2c"; @@ -28,6 +29,7 @@ ethernet@2490000 { status = "okay"; phy-reset-gpios = <&gpio_main TEGRA_MAIN_GPIO(M, 4) GPIO_ACTIVE_LOW>; + local-mac-address = [ 00 00 00 00 00 00 ]; }; i2c@3160000 { -- 2.21.0 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
