Olimex Teres-I is a laptop DIY kit, and A64-Teres-I is its mainboard. https://linux-sunxi.org/Olimex_Teres-A64
This patch enables support for the A64-Teres-I board to u-boot, including enabling screen backlight (lacking from Linux device-tree). sun50i-a64-teres-i.dts is copied verbatim from linux v5.0 (d91ebb9). Cosmetic warnings regarding whitespace and placement of SPDX notice for above file was ignored. config and .dtsi file are adapted from pinebook files. Tested-by: Jonas Smedegaard <[email protected]> Signed-off-by: Jonas Smedegaard <[email protected]> --- Changes for v2: * List Icenowy and Jonas as MAINTAINERS * Add commit hash in linux tree for sun50i-a64-teres-i.dts * Drop superfluous and unsupported Author: tag --- MAINTAINERS | 8 + arch/arm/dts/Makefile | 3 +- arch/arm/dts/sun50i-a64-teres-i-u-boot.dtsi | 41 +++ arch/arm/dts/sun50i-a64-teres-i.dts | 270 ++++++++++++++++++++ configs/teres_i_defconfig | 21 ++ 5 files changed, 342 insertions(+), 1 deletion(-) create mode 100644 arch/arm/dts/sun50i-a64-teres-i-u-boot.dtsi create mode 100644 arch/arm/dts/sun50i-a64-teres-i.dts create mode 100644 configs/teres_i_defconfig diff --git a/MAINTAINERS b/MAINTAINERS index c77abba1e5..d6ba87a0ba 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -319,6 +319,14 @@ F: arch/arm/include/asm/arch-sunxi/ F: arch/arm/mach-sunxi/ F: board/sunxi/ +ARM SUNXI OLIMEX TERES-I +M: Jonas Smedegaard <[email protected]> +M: Icenowy Zheng <[email protected]> +S: Maintained +T: git https://salsa.debian.org/js/u-boot +F: arch/arm/dts/sun50i-a64-teres-i* +F: configs/teres_i_defconfig + ARM TEGRA M: Tom Warren <[email protected]> S: Maintained diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 8167cdb4e8..a12ed81f49 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -483,7 +483,8 @@ dtb-$(CONFIG_MACH_SUN50I) += \ sun50i-a64-pine64-plus.dtb \ sun50i-a64-pine64.dtb \ sun50i-a64-pinebook.dtb \ - sun50i-a64-sopine-baseboard.dtb + sun50i-a64-sopine-baseboard.dtb \ + sun50i-a64-teres-i.dtb dtb-$(CONFIG_MACH_SUN9I) += \ sun9i-a80-optimus.dtb \ sun9i-a80-cubieboard4.dtb \ diff --git a/arch/arm/dts/sun50i-a64-teres-i-u-boot.dtsi b/arch/arm/dts/sun50i-a64-teres-i-u-boot.dtsi new file mode 100644 index 0000000000..1a64b7d09c --- /dev/null +++ b/arch/arm/dts/sun50i-a64-teres-i-u-boot.dtsi @@ -0,0 +1,41 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (C) 2019 Vasily Khoruzhick <[email protected]> + * + */ + +#include "sunxi-u-boot.dtsi" + +/ { + vdd_bl: regulator@0 { + compatible = "regulator-fixed"; + regulator-name = "bl-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ + enable-active-high; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm 0 50000 0>; + brightness-levels = <0 5 10 15 20 30 40 55 70 85 100>; + default-brightness-level = <2>; + enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */ + power-supply = <&vdd_bl>; + }; +}; + +/* The ANX6345 eDP-bridge is on i2c */ +&i2c0 { + anx6345: edp-bridge@38 { + compatible = "analogix,anx6345"; + reg = <0x38>; + reset-gpios = <&pio 3 24 GPIO_ACTIVE_LOW>; /* PD24 */ + status = "okay"; + }; +}; + +&pwm { + status = "okay"; +}; diff --git a/arch/arm/dts/sun50i-a64-teres-i.dts b/arch/arm/dts/sun50i-a64-teres-i.dts new file mode 100644 index 0000000000..c455b24dd0 --- /dev/null +++ b/arch/arm/dts/sun50i-a64-teres-i.dts @@ -0,0 +1,270 @@ +/* + * Copyright (C) Harald Geyer <[email protected]> + * based on sun50i-a64-olinuxino.dts by Jagan Teki <[email protected]> + * + * SPDX-License-Identifier: (GPL-2.0 OR MIT) + */ + +/dts-v1/; + +#include "sun50i-a64.dtsi" + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pwm/pwm.h> + +/ { + model = "Olimex A64 Teres-I"; + compatible = "olimex,a64-teres-i", "allwinner,sun50i-a64"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + + framebuffer-lcd { + eDP25-supply = <®_dldo2>; + eDP12-supply = <®_dldo3>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + lid-switch { + label = "Lid Switch"; + gpios = <&r_pio 0 8 GPIO_ACTIVE_LOW>; /* PL8 */ + linux,input-type = <EV_SW>; + linux,code = <SW_LID>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + + capslock { + label = "teres-i:green:capslock"; + gpios = <&pio 2 7 GPIO_ACTIVE_HIGH>; /* PC7 */ + }; + + numlock { + label = "teres-i:green:numlock"; + gpios = <&pio 2 4 GPIO_ACTIVE_HIGH>; /* PC4 */ + }; + }; + + reg_usb1_vbus: usb1-vbus { + compatible = "regulator-fixed"; + regulator-name = "usb1-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&r_pio 0 7 GPIO_ACTIVE_HIGH>; /* PL7 */ + status = "okay"; + }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ + }; +}; + +&ehci1 { + status = "okay"; +}; + + +/* The ANX6345 eDP-bridge is on i2c0. There is no linux (mainline) + * driver for this chip at the moment, the bootloader initializes it. + * However it can be accessed with the i2c-dev driver from user space. + */ +&i2c0 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; +}; + +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <®_dcdc1>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; + disable-wp; + bus-width = <4>; + status = "okay"; +}; + +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins>; + vmmc-supply = <®_aldo2>; + vqmmc-supply = <®_dldo4>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; + + rtl8723bs: wifi@1 { + reg = <1>; + interrupt-parent = <&r_pio>; + interrupts = <0 3 IRQ_TYPE_LEVEL_LOW>; /* PL3 */ + interrupt-names = "host-wake"; + }; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <®_dcdc1>; + vqmmc-supply = <®_dcdc1>; + bus-width = <8>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + +&ohci1 { + status = "okay"; +}; + +&r_rsb { + status = "okay"; + + axp803: pmic@3a3 { + compatible = "x-powers,axp803"; + reg = <0x3a3>; + interrupt-parent = <&r_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + wakeup-source; + }; +}; + +#include "axp803.dtsi" + +®_aldo1 { + regulator-always-on; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-name = "vcc-pe"; +}; + +®_aldo2 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-pl"; +}; + +®_aldo3 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "vcc-pll-avcc"; +}; + +®_dcdc1 { + regulator-always-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-3v3"; +}; + +®_dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1040000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-cpux"; +}; + +/* DCDC3 is polyphased with DCDC2 */ + +®_dcdc5 { + regulator-always-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-name = "vcc-ddr3"; +}; + +®_dcdc6 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-sys"; +}; + +®_dldo1 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-hdmi"; +}; + +®_dldo2 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + regulator-name = "vcc-pd"; +}; + +®_dldo3 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vdd-edp"; +}; + +®_dldo4 { + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-name = "vcc-wifi-io"; +}; + +®_eldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "cpvdd"; +}; + +®_eldo2 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "vcc-dvdd-csi"; +}; + +®_fldo1 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-name = "vcc-1v2-hsic"; +}; + +/* + * The A64 chip cannot work without this regulator off, although + * it seems to be only driving the AR100 core. + * Maybe we don't still know well about CPUs domain. + */ +®_fldo2 { + regulator-always-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-name = "vdd-cpus"; +}; + +®_rtc_ldo { + regulator-name = "vcc-rtc"; +}; + +&simplefb_hdmi { + vcc-hdmi-supply = <®_dldo1>; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_pb_pins>; + status = "okay"; +}; + +&usbphy { + usb1_vbus-supply = <®_usb1_vbus>; + status = "okay"; +}; diff --git a/configs/teres_i_defconfig b/configs/teres_i_defconfig new file mode 100644 index 0000000000..939dc24408 --- /dev/null +++ b/configs/teres_i_defconfig @@ -0,0 +1,21 @@ +CONFIG_ARM=y +CONFIG_ARCH_SUNXI=y +CONFIG_SPL=y +CONFIG_MACH_SUN50I=y +CONFIG_DRAM_CLK=552 +CONFIG_DRAM_ZQ=3881949 +CONFIG_MMC_SUNXI_SLOT_EXTRA=2 +CONFIG_I2C0_ENABLE=y +# CONFIG_CMD_FLASH is not set +# CONFIG_SPL_DOS_PARTITION is not set +# CONFIG_SPL_EFI_PARTITION is not set +CONFIG_DEFAULT_DEVICE_TREE="sun50i-a64-teres-i" +CONFIG_DM_REGULATOR=y +CONFIG_DM_REGULATOR_FIXED=y +CONFIG_DM_PWM=y +CONFIG_PWM_SUNXI=y +CONFIG_USB_EHCI_HCD=y +CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y +# CONFIG_USB_GADGET is not set +CONFIG_VIDEO_BRIDGE=y +CONFIG_VIDEO_BRIDGE_ANALOGIX_ANX6345=y -- 2.20.1 _______________________________________________ U-Boot mailing list [email protected] https://lists.denx.de/listinfo/u-boot
